User Manual

___________________________________________________________________________
Infrastructure Installation Guide
___________________________________________________________________________ 13
Location Sensor Installation Guide D0405 rev PA6
 Copyright WhereNet, Corp. 2001
WhereNet Confidential
Figure 7 RJ cable tool Figure 8 Fluke LAN CableMeter
5 CONFIGURATION
The Location Sensor (Location Access Point) must be configured prior to
operation. Configuration includes:
• Setting the Location Sensor configuration, including the IP address
• Setting the embedded Access Point configuration (LAP-4200 only),
including the Service Set Identifier (ESS ID), and IP address.
Failure to configure the Location Sensor prior to operation may result in an
inoperative unit.
____________
Note
____________