User's Manual

Setup and Deployment Guide
1 Overview
1.1 Product Kit Overview
The Product Kit allows a network operator to deploy a wireless, multi-hopping ad hoc
network. The product kit supports up to 25 Subscriber Devices, allows mobility between IAPs,
and provides enhanced system management capabilities.
It is recommended that the Network Operator receive setup and deployment training at
MeshNetworks’ facility prior to deploying the
network. MeshNetworks may provide the
Network Operator, as an option, assistance with site surveys and deployment.
1.2 Document Overview
This document describes how to setup, configure, and deploy a kit. The MWR6300
(Wireless Router) and IAP6300 (Intelligent Access Point) require “professional installation” to
ensure the installation is performed in accordance with FCC licensing regulations.
The components of a
system are provided with a preinstalled “standard configuration”
provided by MeshNetworks. The configuration items described in this document allow the
system to be customized with site-specific information.
The document presents information on the current components. As the components
evolve, the document will be updated.
1.3 Acronyms
HAS Hardware Authentication Server
IAP Intelligent Access Point
Mesh Enabled Architecture
MiSC Mobile Internet Switching Controller
SD Subscriber Device (a host device with a WMC6300 installed and operational)
WMC Wireless Modem Card
WR Wireless Router
1.4 Related Documentation
WMC6300 Wireless Router User’s Guide
MeshView User’s Guide
MeshManager User’s Guide
Location Analyzer User’s Guide
1