User's Manual

Setup and Deployment Guide
4 Wireless Router (WR)
The MWR6300 (Wireless Router) is an infrastructure device positioned in a fixed location, such
as on a pole, wall, or rooftop. The MWR6300 requires “professional installation” to ensure the
installation is performed in accordance with FCC licensing regulations.
The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent
structures with a separation distance of at least 2 meters from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. Users and installers
must be provided with antenna installation and transmitter operating conditions for satisfying RF
exposure compliance.
The Wireless Routers primary function is to provide range extension, but it also provides a
means to route around obstructions, and it provides a fixed and known location reference for
use in Geo-Location (optional feature).
All
WRs have mounting points for an optional mounting bracket. For a deployment, a
permanent AC power source for each WR must be provided.
4.1 Equipment
The following list defines the hardware components needed to setup a WR:
• WR Box with N-type Antenna Connector
• A/C Power Cable with standard 3 prong plug
• 7.5 dBi Antenna with N-type Female Antenna Connector
The Network Operator must supply the following:
• Mounting Location
• A/C Power Source
Optional Configurations:
• Mounting Bracket
• Pelco AB-3009-96 for attaching to poles up to 4” in diameter
• Pelco AB-3010 for poles greater than 4” in diameter
• Power Cable to connect to a Fisher-Pierce 7570B photoelectric cell
• Serial Cable with DB9 Male Connectors (for PC to WR debug)
12