User's Manual

Setup and Deployment Guide
2 Subscriber Device (SD)
A Subscriber Device consists of both a Wireless Modem Card (WMC6300) and a customer
provided host device such as a notebook computer.
2.1 Equipment
The following list defines the hardware components required to setup the WMC6300:
• WMC6300 Card
• 2.4 GHz Antenna with a MMCX connector
• Antenna Clip with adhesive backing
Equipment that must be supplied by the Subscriber includes the following:
• Notebook PCs running Microsoft Windows 2000™ Operating System
Optional Equipment
• External 2.4 GHz Automobile Antenna
2.2 Loading and Verifying Software
Refer to the WMC6300 User’s Guide for step-by-step details on the setup procedures.
A CD will be supplied with the software to load on the Subscriber’s equipment. It contains the
following files:
Windows 2000
Setupmeaclient.exe – installs the drivers and MeshTray
Setupmv.exe – installs MeshView
2.2.1 Windows 2000 Installation
To install the drivers for the first time on a notebook PC running Microsoft Windows 2000, run
the Setupmeaclient.exe from the CD-ROM. Note: The drivers must be installed before
inserting the wireless modem card).
If MeshView is desired on a Win2000 subscriber device, run the setupmv.exe from the CD-
ROM.
2.3 Testing
When the WMC6300 is inserted, you may receive an audible indicator that the device has been
recognized. (If there is a problem with the drivers, Windows will prompt you for a new device
installation.)
Click on the Windows “Start” button and select “Run” from the popup menu. Enter the
command “ipconfig“ in the text box and click on the “OK” button to check your IP address. If an
IP address in the range of 10.0.x.1 is displayed, the transceiver is working properly.
7