User Manual

WiData Firefly System Hand Held Communicator User’s Guide
3
Card and Socket Services
WiData Corporation has developed CLB library files, INI configuration setting files, INF setup information files, VXD
virtual drivers, and CFG configuration files that enable the card to be recognized by a range of card and socket servers.
Package Contents
The hardware package consists of:
• WiData Firefly Hand Held Communicator PCMCIA card (HPC-2000-00AA)
• Software installation diskette
Requirements
Handheld computer or PC with Type II PC Card slot.
Card and socket services for PC card
External antenna cable and antenna (usually provided with handheld computer)
I/O ports 0210-0217
2k x 8-bit RAM Memory block for PC card
Up to 384k byte conventional memory depending on specific application software
Most handheld computers require special software that allows the disk drive to be flashed. Verify that the appropriate
handheld computer companion software the allows files to be flashed or loaded to the internal disk is available and that all
docking station and cable equipment is also available. This is required if the software is to be loaded.