User's Manual

Quick Reference Guide 5
Getting Started
Perform the following to setup the HC1 for the first time:
1. Install the battery
2. Charge the HC1
3. Determining dominant eye
4. Re-position Computer/Optical Pod Assembly
5. Re-position speaker module
6. Place the HC1 on head
7. Adjust head strap
8. Adjust optic pod.
Installing the Battery
To install the battery:
1. Insert the battery into the battery well with the battery notches facing down and the
release latch facing up.
2. Rotate the battery into the battery well until it snaps into place. If the battery is charged,
the HC1 turns on.
3. Align the battery door with the housing.
4. Close battery door.
NOTE These procedure show the HC1 with a 1950 mAh battery. Some HC1 configurations
come with a 4800 mAh battery.
Battery Release LatchBattery Release Latch
Contacts
Review
the batter
y
into the batter
y
well with the
b
the battery into the battery well with the b
e latch facin
g
up.
e latch facing up.
evie
R
R
R
R
R
R
R
e
e
e
e
evie
e
e
e
R
R
R
Copy
e
r
y
notches facin
g
down and
try notches facing down and t
o
o
o