User's Manual
Table Of Contents
- Patents
- Warranty
- Revision History
- Table of Contents
- About This Guide
- Quick Start
- Getting Started
- Installation and Communication
- Administrator Console
- Setup Examples
- Troubleshooting
- Technical Specifications
- Firmware Upgrade Procedures
- Java Upgrade Procedures
- Static IP Configuration
Appendix B Firmware Upgrade Procedures
Introduction
This appendix provides the reader firmware upgrade procedure using the web-based Administrative Console.
There are two methods to update reader firmware:
•
Update Method 1, Use a LAN on page B-3 - the preferred method when there are a number of readers
connected to a LAN.
•
Update Method 2, Direct Connect Over the Ethernet Port on page B-5 - the preferred method when updating
a single reader using an Ethernet crossover cable.
Each of the following types of firmware performs unique changes to the current settings and can be upgraded
independently. Available firmware includes:
•
Monitor Version
•
OS Version
•
Application Server Version
•
MAC Radio Firmware Version
•
Radio API Version
Prerequisites
The following items are required to perform the update:
•
Reader with power supply
•
Laptop (or other host computer)
•
If using the LAN Update procedure, a Cat5 ethernet cable is required
•
If using the Direct-Connect update procedure a Cat5 Crossover cable is required
•
An ftp server on the host computer