User's Manual

Set-Up Examples 5 - 5
Shelf/Tool Crib Cage
Shelf/Tool Crib Cage example prameters: The reader reads 500 tags in 4 seconds at a distance of less than 12
feet.
Describe how to optimize filtering to avoid stray tags (outside the solution).
Installation
Identify the unique installation challenges for the Shelf/Tool Crib CageShelf/Tool Crib CageShelf/Tool Crib
CageShelf/Tool Crib CageShelf/Tool Crib Cage example.The location of the reader and antennas will be discussed
and the procedures to optimize the tag reads.
• Reference RFID Technology Overview on page 2-1 for RFID overview.
• Reference Introduction on page 3-1 for an installation overview.
• Reference Communications Connections on page 3-6 for standard communications connections overview
and provide the unique communications connections installation for a Shelf/Tool Crib Cage installation.
• Reference Reading Tags on page 3-7 for standard overview and provide the unique tag reading
installation requirements for a Shelf/Tool Crib Cage installation.
• 4 AN480 were used with power setting to 30dBm.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the Shelf/Tool Crib Cage example. Reference
Introduction on page 4-1 for a configuration overview.
• Reference Reader Administrator Console on page 4-12 for standard procedures.
• Reference Managing the FX Series RFID Readers on page 4-2 for standard reader management overview
and provide the unique reader management configuration optimization requirements for a Shelf/Tool Crib
Cage installation.
Optimizing Reader Functions
Identify the unique function optimization challenges for the Shelf/Tool Crib Cage example.
For each setup illustrate:
• Filtering (select statement)
• Query tuning (Q, Session, Select bit)
• Post read filtering
• Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the Shelf/Tool Crib Cage example. Reference
Introduction on page 6-1 for a troubleshooting overview.
• Reference Troubleshooting on page 6-1 for standard procedures and provide the unique reader
troubleshooting requirements for a Shelf/Tool Crib Cage installation.