User's Manual

5 - 2 FX Series RFID Readers Integrator Guide
Point of Sale
POS (Point of Sale) example prameters: Reader reads 10 different tags within 300 ms.
Can be single item, multiple items, or multiple tags. POS readers can be dense or separated/shielded area.
Indicate how POS readers can add writing. Indicate how reads can be triggered.
Installation
Identify the unique installation challenges for the POS example. The location of the reader and antennas (under
the read table) will be discussed and the procedures to optimize the tag reads.
• Reference RFID Technology Overview on page 2-1 for RFID overview.
• Reference Introduction on page 3-1 for an installation overview.
• Reference Communications Connections on page 3-6 for standard communications connections overview
and provide the unique communications connections installation for a POS installation.
• Reference Reading Tags on page 3-7 for standard overview and provide the unique tag reading
installation requirements for a POS installation. Discuss antenna location one foot below the table (other
options?) discuss the Mobile Mark (BP6-915LP) antenna and the power setting of 20dBm.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the POS example. Reference Introduction on
page 4-1 for a configuration overview.
• Reference Reader Administrator Console on page 4-12 for standard procedures.
• Reference Managing the FX Series RFID Readers on page 4-2 for standard reader management overview
and provide the unique reader management configuration optimization requirements for a POS installation.
• Discuss optimization techniques for an under the table reader antenna.
Optimizing Reader Functions
Identify the unique function optimization challenges for the POS example.
For the setup illustrate:
• Filtering (select statement)
• Query tuning (Q, Session, Select bit)
• Post read filtering
• Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the POS example. Reference Introduction on page 6-1 for
a troubleshooting overview.
• Reference Troubleshooting on page 6-1 for standard procedures and provide the unique reader
troubleshooting requirements for a POS installation.