User's Manual
Table Of Contents
- Warranty
- Service Information
- Software Support
- Introduction
- Features
- Installing a micro SIM Card (ET55 Only)
- Install a micro SD Card
- Charging the ET5X
- Using the Camera
- Reading NFC Cards And RFID Tags
- Regulatory Information
- UL Listed Products with GPS
- Radio Modules
- Wireless Devices Country Approvals
- Health and Safety Recommendations
- Power Supply
- Batteries
- Radio Frequency Interference Requirements-FCC
- Radio Frequency Interference Requirements - Canada
- Marking and European Economic Area (EEA)
- Other Countries
- Waste Electrical and Electronic Equipment (WEEE)
- End User License Agreement
- CMM Disclosure
Quick Reference Guide 5
Installing a micro SIM Card (ET55 Only)
To install a micro SIM card:
1. Press the Power button to turn off the ET55.
2. Lift the notched corner of the battery cover.
3. Carefully lift the battery cover off the ET55.
4. On the 8” version, push the two locking tabs up, then pull up on the tab to remove battery.
On the 10” version, push the two locking tabs up (1), then, using index fingers, lift the battery up (2).
Item Description
17 NFC Antenna Position - Use to read NFC cards and RFID tags.
18 Stereo Speakers - Provides audio playback.
19 Docking Connector - Interfaces with the cradle.
18
19
18
17
8” Version
18
10” Version