User's Manual

Launch Applications

To launch an application:

1. Touch the Launcher icon. The Launcher window displays.

2. Touch an application icon to launch the application.

Configure the ET1

To configure ET1 settings, touch > Settings. Refer to the ET1

Enterprise Tablet User Guide for information on configuring the

ET1.

Power Button

Use the Power button to place the ET1 in suspend mode, battery

swap mode, to reset the ET1 or to power off the ET1.

Suspend Mode

Press and release the Power button to place the ET1 in suspend

mode. In Suspend Mode the ET1 turns off the display and goes

into a low power state to conserve battery power.

Press and release the Power button to wake the ET1 and then

slide up to unlock the screen.

Battery Swap Mode

Before replacing the battery, place the ET1 in Battery Swap

Mode. Press and hold the Power button until the Device options

dialog box appears then touch Battery swap.

The Decode LED lights red. When the LED turns off, it is safe to

remove the battery.

Reset

Reset the ET1 if applications stop responding. Press and hold

the Power button until the Device options dialog box appears

then touch Reset.

Power Off

To power off the ET1, press and hold the Power button until the

Device options dialog box appears then touch Power off. When

the Power off dialog box appears, touch OK.

Launcher