User's Manual

3 - 30 ES400 User Guide
Phone Network Setup
Verizon Wireless Activation
Automatic Activation
The Activation Wizard allows automatic activation. To activate the ES400 using the automated service, the
ES400 attempts to call the network on a special number that automatically downloads the phone number and
identification codes from the network.
Verizon Wireless automatically downloads the provisioning data. This process is invisible to the user and occurs
once, after account activation, during the first data connection attempt.
To activate the phone using the Verizon Wireless automated service:
1. Ensure the ES400 is in a strong signal area.
2. The Activation Wizard automatically starts whenever the phone is turned on. If the wizard does not appear, tap
Start > Phone > Menu > Activation Wizard... .
Figure 3-44 Verizon Activation Wizard
3. Tap Auto to connect to the Verizon Wireless Network to automate activation. Automated activation provides all
required codes and identification numbers over the network. No additional activation setup is required.
4. If activation is successful the Congratulations window appears.
NOTE After an ES400 is provisioned for Verizon Wireless service, it is strongly recommended that no other service
provider loads are downloaded to the
ES400 and no changes are made to any of the provisioning information.