User's Manual

Settings 9 - 3
Figure 9-3 Password Window - Password Tab
2. Select Prompt if device unused for check box to enable password protection.
3. From the drop-down list, select a time value for the protection to take affect after non-use.
4. From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.
5. For a simple password, enter a four-digit password in the Password field.
For a stronger password:
a. Enter a seven character password in the Password: field. A strong password must contain at least seven
characters and contain at least three of the following: uppercase and lowercase letters, numerals, and
punctuation.
b. Re-enter the password in the Confirm: field.
6. Tap OK.
7. To set a hint to remember the password, tap the Hint tab.
Figure 9-4 Password Window - Hint Tab
8. In the text box, enter a hint for a password reminder.
9. Tap OK.
When the ES400 is not used for a period of time and the user tries to access the device, the Lock window appears.