User's Manual

7 - 10 ES400 Mobile Computer User Guide
4. Tap New device. The ES400 searches for Bluetooth devices in the area.
5. Select the headset name and tap Next. The Passcode window appears.
6. Enter the headset’s passcode.
7. Tap Next. The ES400 connects to the headset. Refer to the headset user manual for instructions on
communicating with a Bluetooth device.
Figure 7-9 WWAN Bluetooth Audio Notification Dialog Box
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 30 feet (10 meters) of one another.
3. Tap Start > Settings > Bluetooth icon > Devices tab.
4. Tap Add new device. The ES400 begins searching for discoverable Bluetooth devices in the area.
5. Select a device from the list.
6. Tap Next. The Enter Passcode window appears.
7. Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
8. In the device list, tap the serial device. The Partnership Settings window displays.
9. Select the Serial Port checkbox.
NOTE During an active connection, the ES400 cannot go into suspend mode when the Power Button is pressed.
A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Headset icon
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.