User's Manual

A - 2 Symbol DS6878 Product Reference Guide
Pairing Modes Unlocked 4-20
Pairing on Contacts Enable 4-21
Connection Maintenance Interval 15 min 4-24
Authentication Disable 4-25
Variable Pin Code Static 4-26
Encryption Disable 4-27
User Preferences
Set Default Parameter Set Defaults 5-4
Parameter Bar Code Scanning Enable 5-5
Beep After Good Decode Enable 5-5
Suppress Power Up Beeps Do Not Suppress 5-6
Beeper Tone Medium 5-7
Beeper Volume High 5-8
Beeper Duration Medium 5-9
Beep on Insertion Enabled 5-9
Batch Mode Normal (Do Not Batch Data) 5-10
Low Power Mode Enabled 5-12
Time Delay to Reduced Power Mode 1 Sec 5-13
Timeout to Low Power Mode from Auto Aim 15 Sec 5-14
Hand-Held Trigger Mode Level 5-15
Picklist Mode Disabled Always 5-16
Mobile Phone/Display Mode Disable 5-17
Continuous Bar Code Read Disable 5-18
Decode Session Timeout 9.9 Sec 5-19
Timeout Between Decodes, Same Symbol 0.5 Sec 5-20
Timeout Between Decodes, Different Symbols 0.2 Sec 5-20
Fuzzy 1D Processing Enable 5-21
Hand-Held Decode Aiming Pattern Enable 5-22
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.