User's Manual

Table Of Contents

Symbologies 14 - 37

Code 11

Parameter # 0Ah

To enable or disable Code 11, scan the appropriate bar code below.

Set Lengths for Code 11

Parameter # L1 = 1Ch, L2 = 1Dh

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)

the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific

range.

•

One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.

Select the length using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode

only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4.

To correct an error or to change the selection, scan Cancel on page D-2.

•

Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two

selected lengths. Select lengths using the numeric bar codes in Appendix D, Numeric Bar Codes. For

example, to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two

Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan

Cancel on page D-2.

•

Length Within Range - Select this option to decode a Code 11 symbol with a specific length range.

Select lengths using numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode

Code 11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within Range.

Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the

selection, scan Cancel on page D-2.

•

Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the

digital scanner’s capability.

Enable Code 11

(01h)

*Disable Code 11

(00h)