User's Manual

OPOS (IBM HAND-HELD with FULL DISABLE)
ICL RS-232
NIXDORF RS-232 MODE A
*STANDARD RS-232
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
IBM PC/AT and IBM PC COMPATIBLE*IBM AT NOTEBOOK
NON-IBM SCANNER EMULATION (PORT 5B) TABLE-TOP SCANNER EMULATION (PORT 17)
HAND-HELD SCANNER EMULATION (PORT 9B)
IBM HAND-HELD USB
SYMBOL NATIVE API (SNAPI) WITH IMAGING
STEP 1 - CONNECT HOST INTERFACE
DIGITAL SCANNER FEATURES
See Product Reference Guide
for detailed information
NOTE: Cables may vary depending on configuration
STEP 2 - SET UP INTERFACE (Scan Host Bar Codes)
1 Scan Window
2
3
USB
KEYBOARD WEDGE
USB
Scan ONE of the bar codes below
Keyboard Wedge
Scan a bar code below
*USB KEYBOARD (HID)
IBM 46XX
IBM 46XX
Scan ONE of the bar codes below
The Auto-Host Detect Cable feature automatically detects the host interface type,
but there is no default setting. Scan one of the bar codes below to select the
appropriate port.
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
The Auto-Host Detect Cable feature automatically detects the host interface type
and uses the default setting. If the default (*) does not meet your requirements,
scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.
USB - OVERRIDE CAPS LOCK KEY (ENABLE)
*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)
RS-232
RS-232
Scan ONE of the bar codes below
http://www.zebra.com/DS2278
USB CAPS LOCK OVERRIDE BAR CODE
ADD A TAB KEY
To add a Tab key after scanned data, scan
the bar code below.
ADD A TAB KEY
RETURN TO FACTORY DEFAULTS
USEFUL BAR CODES
ADD AN ENTER KEY
To add an Enter key after scanned data, scan
the bar code below.
(Carriage Return/Line Feed)
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
DS2278 DIGITAL SCANNER
Quick Start Guide
Digital Scanner
POST IN WORK AREAPOST IN WORK AREA
123 S can
4 Beeper
ABOUT 123Scan
123Scan is an easy-to-use, PC-based software tool that enables rapid
and easy customized setup of a scanner via a bar code or USB cable.
For more information, visit: http://www.zebra.com/123Scan.
UTILITY FUNCTIONALITY
- Device configuration
- Electronic programming (USB cable)
- Programming bar code(s)
- Data view – scan log (display scanned bar code data)
- Access asset tracking information
- Upgrade firmware and view release notes
- Remote management (SMS package generation)
Note: Standard range digital scanner pictured.
Scan LEDs
Scan Trigger
FACTORY DEFAULTS
Aiming
012345 012345
Note: For best performance, it is recommended to use Zebra accessories.
CRADLE CABLE CONNECTION
Host Port
CRADLE INSERTION
2
1
3
4
BATTERY REMOVAL
1
Unscrew Remove Battery
Note: It is recommended to fully charge the battery before use.
2
BATTERY INSERTION
1
Replace
Battery
Push
Down
2
Screw to
Tighten
3
CHARGE ONLY MICRO USB CONNECTION
C
M
Y
CM
MY
CY
CMY
K
MN-002916-01a_ds2278front-qsg-en_print.pdf 1 4/17/2017 10:18:36 AM