User's Manual

Table Of Contents

2 CR8178-SC Standard Cradle

Introduction

The CR8178-SC (standard) cordless digital scanner cradle acts as charger and

radio communication interface for the

DS8178 cordless digital scanner. The

CR8178-SC can sit on a desktop or be mounted on a wall. The CR8178-SC

healthcare cradle can sit on a desktop or be mounted on a wall or cart.

The cradle receives data from the digital scanner via a Bluetooth radio, and sends

that data to the host through an attached cable. The cradle also charges the

digital scanner’s internal battery when the digital scanner is inserted. The digital

scanner can be charged from an external power supply or a USB cable powered

by the host.

This document provides basic instructions on setting up and using the cradle.

Equipment Supplied

The cradle package includes one CR8178-SC cradle.

Accessories

The following equipment may be needed:

• Power supply (for faster charging).

• Mounting

• Two M4 screws (for a vertical mount using the threaded brass screw holes,

if applicable). Not available from Zebra.

• Wall mount bracket. Not available from Zebra.

• 3M™ Dual Lock™ fasteners for mounting. Sold separately from Zebra.

Save the shipping container for storing or shipping. Inspect all equipment for

damage. If anything is damaged or missing, call an authorized Zebra Support

Center immediately.