User's Manual

Quick Reference Guide 9
Troubleshooting
If the cradle does not work after following the previous procedures:
• Check the system power.
• Check for loose cable connections.
• Check that the digital scanner is inserted properly in the cradle.
• Check that the host settings are correct and the cradle is connected to
the appropriate port on the host.
• If water spills on the contacts area, the unit might not function properly.
Turn the power off and tilt the cradle to drain as much liquid as
possible. Do not shake the cradle. Use a paper towel to dry the outside
surfaces, and expose the unit to room conditions for up to 24 hours to
allow liquid to dry around the contacts.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion.
• Maintain a natural position.
• Reduce or eliminate excessive force.
• Keep objects that are used frequently within easy reach.
• Perform tasks at correct heights.
• Reduce or eliminate vibration.
• Reduce or eliminate direct pressure.
• Provide adjustable workstations.
• Provide adequate clearance.
• Provide a suitable working environment.
• Improve work procedures.
CAUTION In order to avoid or minimize the potential risk of
ergonomic injury, follow the recommendations below.
Consult with your local Health and Safety Manager to
ensure that you are adhering to your company's
safety programs to prevent employee injury.
Draft 1