User's Manual

Quick Reference Guide 5
Inserting the Digital Scanner in the Cradle.
Sending Data to the Host Computer
The cradle receives data from the digital scanner via a wireless radio
connection and transmits it to the host computer via the host cable. The
digital scanner and cradle must be paired for successful wireless
communication.
Pairing
Pairing is the process by which a digital scanner initiates communication
with a cradle. To pair the digital scanner with the cradle, scan the pairing
bar code. A high/low/high/low beep sequence indicates that the pairing
bar code was decoded. When a connection between the cradle and digital
scanner is established, a low/high beep sounds.
CAUTION Do not pour, spray, or spill any liquid on the cradle.
NOTE The pairing bar code that connects the digital scanner to a
cradle is unique to each cradle.
Do not scan data or parameters until pairing completes.
Only when the digital scanner is paired to the cradle, it
automatically tries to reconnect to a remote device when a
disconnection occurs that is due to the radio losing
communication. Refer to the Product Reference Guide for
more information.
Draft 1