User's Manual

2 CR2278 Presentation Cradle

Introduction

The CR2278-PC (presentation) cordless digital scanner cradle acts as

charger and radio communication interface for the

DS2278 cordless digital

scanner. The CR2278-PC can sit on a desktop or be mounted on a wall.

The cradle receives data from the digital scanner via a Bluetooth radio,

and sends that data to the host through an attached cable. The cradle also

charges the digital scanner’s internal battery when the digital scanner is

inserted. The digital scanner can be charged from an external power

supply or a USB cable powered by the host.

This document provides basic instructions on setting up and using the

cradle.

Equipment Supplied

The cradle package includes one CR2278-PC cradle.

Accessories

??? verify

The following equipment may be needed:

• Power supply (for faster charging).

• Mounting bracket (must be purchased separately).

• Two M4 screws (for a bracket mount using the threaded brass screw

holes, if applicable). Not available from Zebra.

Save the shipping container for storing or shipping. Inspect all equipment

for damage. If anything is damaged or missing, call an authorized Zebra

Support Center immediately.