User's Manual

Launching Applications
The actual software configuration will vary for your
installation configuration.
Touch an application icon to launch the application
Press the icon to return to the Home Page
Powering Down
To power down the CONCIERGE HUB, unplug the power
supply from the back of the unit.
Scanning Barcodes
If you are using the CONCIERGE SCANNER ACCESSORY
(“SCANNER”), then follow these instructions to scan
barcodes…
1. Hold a bar-coded item approximately 6 to 12 inches from the
SCANNER’s scanning window
2. The SCANNER’s proximity sensor will sense the item and
begin projecting a red LED and laser aiming pattern which
allows positioning the barcode within its field of view
3. Center the printed barcode symbol within the aiming pattern,
ensuring the entire symbol is within the illuminated
rectangular area formed by the cross pattern
4. A successful scan will pass the barcode data to the
CONCIERGE HUB application