User's Manual

Configuration Notes
The instructions in this manual describe a typical CONCIERGE configuration.
The actual hardware and software configuration will vary for your installation configuration.
Important hardware notes…
• The CONCIERGE HUB and CONCIERGE SCANNER ACCESSORY are designed to function with a touchscreen display that is
selected and installed per the customer specified configuration.
• The customer may choose to an optional Magnetic Stripe Reader (MSR) to process credit cards (sold separately).
• The instructions below describe a basic system configuration of a CONCIERGE HUB and CONCIERGE SCANNER ACCESSORY
connected to a touchscreen display.
• The actual hardware system configuration will vary based on customer preference.
Important software notes…
• The customer may develop and install additional custom software applications which will run on the CONCIERGE HUB.
• The instructions below describe default software applications included with the CONCIERGE HUB.
Getting Started
To get started…
• Connect the CONCIERGE HUB (“HUB”) to a
touchscreen display using the video cable, audio cable,
and USB cable included with the touchscreen display.
• If using the CONCIERGE SCANNER ACCESSORY
(“SCANNER”), connect the HUB to the SCANNER using
the USB cable included with the SCANNER.
• Plug-in the power supply to the HUB.
• The HUB software will automatically boot to the Home
Page.
CONCIERGE HOME PAGE