User's Manual
CA10 PosterCA10 Poster
BLACK
PANTONE 285
CA10
PERF
Quick Start Guide
1
2
3
4
5
6
7
8
WEARABLE OPTION DEPLOYMENT APPLICATION SETUP
Lanyard Clip to Shirt
1. Unzip the deployment application zip file anywhere on your Windows PC or a Mac
2. Make sure that your computer is on the deployment network ie a temporary
WiFi network with SSID=parrot2008 and Security Settings=Open
3. Make sure you computer has a static IP set to 192.168.0.201
4. Go to the directory where you unzipped the deployment application and run
Launcher.bat (Launcher.sh for Mac)
5. Double click on SuperLite UI shortcut to open “http://localhost:9090/DA/DA”
in your browser (Safari or IE6 or higher)
6. Next few pages go thru the UI that opens up in the browser
Use this Tab to enter information
about your network
Select the WT channel
you want to set for
your devices
Enter a profile name
to refer to these
settings in future
After selecting UI interaction
eg “Single Click” .. select the
functions to be performed
by each button
Press Save to save all settings
that you entered above
Enter Network configuration name
here, so you can refer to it in future
Use this tab to set walkie
talkie channel and assign
button functions. You can
skip this tab and just use
factory defaults
Press Save to save all settings
that you entered above
Enter the SSID of your
WiFi network here
Enter your wireless
security parameters
Use this Tab to apply Network
and Profile Settings to your devices
Note: All configuration elements
shown below are optional.
You can select whichever you
want to push down to devices
eg if you only want to update
firmware, select the firmware
version from the drop down
and leave everything else empty
As the devices are turned on
and they are able to join the
factory default Wifi network
(ssid=parrot2008), they will
start showing up here.
Press Apply to send a signal
to ALL devices to start
downloading the above
configuration
Use this Tab to monitor devices that are on your network.
The data on this page is automatically refreshed as new
updates are sent by devices
Press Save to save all
settings that you entered
above