User's Manual

Appendix A Customer Support A - 5
Figure A-3 Universal Style Metal Bracket - Part Number MPACT-A1O10-004-WR
Figure A-4 Universal Style Plastic Bracket with Beacon- Bracket Part Number MPACT-A1O10-001-WR
To mount the universal style beacon to a Lozier shelf:
1. From the MPact Toolbox, select a site floor plan and beacon Place
Holder location for the beacon installation.
2. Mount the universal beacon shelf-bracket on the shelf:
• Metal brackets: Fit in place and tighten onto the shelving unit using a phillips-head screw driver.
• Plastic brackets: Fit in place and snap onto the shelving unit.
3. Fit the beacon’s universal style housing into the bracket and turn the beacon housing clockwise 90 degrees.
The bar code label should face up toward the ceiling and the smooth
front of the beacon should face out toward the aisle
where the retail customer is expected to dwell.
DRAFT 2B - 12 June 2014