User's Manual

A - 4 Motorola Solutions MPact Location & Analytics Deployment Guide
A.3 Beacon Part Number: MPACT-T1B10-000-WR (Model # ATLS-T1B)
As a prerequisite, the following hardware items are required to a Lozier style shelving unit:
• Lozier style shelving units are in place
• Beacon: Part number - MPACT-T1B10-000-WR
• Bracket mount, one of the following:
• MPACT Metal Lozier Bracket: Part number MPACT-A1O10-004-WR
• MPACT Plastic Lozier Bracket: Part number MPACT-A1O10-001-WR
• Phillips head screw driver for mounting the bracket (metal brackets only) to the Lozier shelf
Installing the Universal Style Beacon
The image below shows a universal style beacon housing. While there is no up arrow on this beacon’s housing, the
beacon is oriented similar to the tie wrap style of beacon housing (see Beacon Part Number: MPACT-T1B20-000-WR
(Model # ATLS-T1B) on page A-3).
Figure A-2 Tie Wrap Style Beacon - MPACT-T1B10-000-WR
The beacon and bracket are mounted on the shelf so the beacon is up and facing out toward the aisle so the signal
emitted by the beacon can be picked up by the retail customer’s phone application. The bracket mounts directly onto
the retail shelf. There are two styles of bracket mounts from which to choose, one is metal and one is plastic.
DRAFT 2B - 12 June 2014