User's Manual

4 - 2 Motorola Solutions MPact Location & Analytics Deployment Guide
4.1 Beacon Installation
Use the iPad to scan the beacon’s bar code and connect the beacon to the floor plan location in the MPact Toolbox.
To connect the beacon hardware to the MPact Toolbox application:
1. From the toolbox home page, select Installation.
A global map displays the existing site locations.
Figure 4-1 MPact Toolbox - Deployment Site Map
2. Use the Close button located in the lower left-had corner of the screen to close the map and display the Site Hierarchy
screen.
DRAFT 2B - 12 June 2014