User's Manual

3 - 12 Motorola Solutions MPact Location & Analytics Deployment Guide
3. Provide the numeric server IP address and port designated for traffic for MPact beacons. This is a non IPv6 address.
The first time logging into the MPact Toolbox, the following are acceptable IP addresses for logging on to the server:
• http://IP/atls/atls/atls.html
• http://IP:80/atls/atls/atls.html
• https://IP/atls/atls/atls.html
• https://IP:443/atls/atls/atls.html
4. Select the Login bu
tton. Select Remember Me to use the same credentials in subsequent logins.
Upon successful login, the toolbox home page displays. The first time you log onto the MPact Toolbox application, wait for
the server to download toolbox data to the iPad, which takes about a minute. The indicator in the upper left corner of the
screen displays the progress of the download.
Figure 3-11 MPact Toolbox Home Page - Beacon Installation
The Home page displays beacon setup and maintenance activities:
NOTE: T
o enable the https connection, a certificate is required in the following directory:
/var2/muxi/cert/nuxi.jks. The nuxi.jks certificate file is provided for https connections. To
use a company generated certificate, rename the certificate to nuxi.jks and put it in the
directory.
Installation Select the Installation ic
on to display a site map containing building and floor plan images.
Individual floors can be administrated for specific beacon deployment activities.
Maintenance Select the Maintenance option to validate the operation and functionality of existing beacon
deployments.
Beacon Firmware Select Beacon Firmware to launch a utility for upgrading beacon firmware.
DRAFT 2B - 12 June 2014