User's Manual

MPact Server Installation and Setup 2 - 19
10. Select Save to commit the updates, Reset to revert to the last saved configuration or Cancel to close and exit the screen.
11. Repeat this process to manually add more place holders. Once place holders have been added to the floor plan, beacons
can be installed (scanned) and configured.
2.6.2 Beacon Place Holder CSV File Import Setup
For large deployments, a CSV file is used to setup beacon place holders on a site floor plan on the MPact Server (instead of
manual setup).
To import the CSV file to the site
floor plan in the server:
1. Select API
under the Operations main menu.
Figure 2-22 MPact Server System Maintenance- CSV File Import
Advanced Beacon
Settings
Antenna Pattern: Use the drop-down menu to set whether the antenna pattern is a Circle (360
degree omnidirectional) pattern or a Semi-Ellipse (180 degree direction) pattern.
Beacon ID: The ID of the beacon receiving advanced settings.
Degrees: Set from 0 to 360 degrees.
Beacon Offset: Set from 1 to 4 meters.
DRAFT 2B - 12 June 2014