User's Manual

2 - 16 Motorola Solutions MPact Location & Analytics Deployment Guide
2.6.1 Place Holder Manual Setup
Manual place holder setup can be used for smaller deployments.
To manually set up a beacon’s place holder position:
1. Select Active View under the Locationing main menu.
2. From the Tree Hierarchy area on the left-hand side, select the System node to display the Unplaced Sites that have not yet
been placed on the global map.
3. Use the zoom feature in the upper left-hand corner of the right pane to zoom in to the appropriate site location.
4. Drag and drop one or more of the Unplaced Sites to the appropriate site location on the global map.
Figure 2-18 MPact Server - Site Map Placement
5. Expand the Tree Hierarchy on the left-hand pane and select the corresponding site floor for the deployment.
DRAFT 2B - 12 June 2014