User's Manual

MPact Server Installation and Setup 2 - 7
2.3 Tree Setup
Use Tree Setup to build the tree hierarchy for each store site location on a global map. A tree hierarchy is built from a global
site location down to each floor in a building, including floor plans for each floor in a building. After the tree is saved,
configurations are added to the system for beacon deployment on the floors of each site.
To administrate the MPact tree setup:
1. Select T
ree Setup under the Operations main menu item.
Figure 2-5 MPact Server UI Tree Setup
2. From the System drop-down menu, select Add Child and drag the cursor over to the node to add the required node. Build
the hierarchy for Country, Country Region, City, Campus, Site, Area and Floor, as needed.
Keep the following in mind when creating the tree:
• You do not have to create a Coun
try before creating a Site.
• At the end of every tree setup there must be a Floor.
Figure 2-6 MPact Server UI Tree Setup - Adding Tree Nodes
NOTE: When building the tree hierarchy, the following characters are invalid:
-q- $ * < > # ~. All other characters, including space, are valid.
DRAFT 2B - 12 June 2014