User's Manual

2 - 4 Motorola Solutions MPact Location & Analytics Deployment Guide
2.2 Server Configuration
Use System Configuration for the administration of beacon settings defined globally on the MPact Server. The beacon
settings are then pushed to selected beacons as their respective configurations warrant. Beacon configuration settings must
be set accurately in the MPact Server before they can be provisioned to an MPact Toolbox supported iPad.
To administrate the system configuration:
1. Select System Configuration under the Configuration main menu item.
Figure 2-3 MPact Server System Configuration - System Configuration
2. Modify the System Configuration parameters as required.
Figure 2-4 MPact Server - System Configuration
DRAFT 2B - 12 June 2014