User's Manual

Table Of Contents
Installation Guide 33
clients on both the 2.4GHz and 5GHz radio bands.
14. Select Next. The Typical Setup Wizard displays the LAN
Configuration screen to set the Access Point's LAN interface
configuration.
15. Set the following DHCP and Static IP Address/Subnet information for
the LAN interface:
Use DHCP - Select the checkbox to enable an automatic
network address configuration using the Access Point’s DHCP
server.
Static IP Address/Subnet - Enter an IP Address and a subnet for
the Access Point's LAN interface. If Use DHCP is selected, this
field is not available. When selecting this option, define the
following DHCP Server and Domain Name Server (DNS)
Note • When Bridge Mode is selected, WAN configuration cannot be
performed and the Typical Setup Wizard does not display the WAN
configuration screen.