User's Manual

Installation Guide 23
A green checkmark to the left of an item in the Navigation Panel
defines the task as having its minimum required configuration set
correctly. A red X defines a task as still requiring at least one parameter
be defined correctly.
6. Select Save/Commit within each page to save the updates made to
that page's configuration. Select Next to proceed to the next page listed
in the Navigation Panel without saving your updates.
For the purposes of this guide, use the Typical Setup
(Recommended) option to simplify the process of getting the Access
Point up and running quickly with a minimum number of changes to the
Access Point’s default configuration.
For information on using the Access Point’s Advanced Setup option,
refer to the WiNG Access Point System Reference Guide to familiarize
yourself with the feature set supported by the WiNG operating system.
The guide is available at www.zebra.com/support.
To configure the Access Point using the Typical Setup Wizard:
7. Select Typical Setup from the Choose One type to Setup the Access
Point field on the Initial Setup Wizard.
8. The Typical Setup Wizard displays the Access Point Settings screen
to define the Access Point's Standalone versus Virtual Controller AP
functionality. This screen also enables selection of the country of
operation for the Access Point.
Note • While you can navigate to any page in the navigation panel, you
cannot complete the Initial AP Setup Wizard until each task in the
Navigation Panel has a green checkmark.
AP8432_IG.book Page 23 Monday, March 14, 2016 8:39 AM