User's Manual
Table Of Contents
- 1 Introduction
- 2 Hardware Installation
- 3 Basic Access Point Configuration
- 4 Specifications
- 5 Regulatory Information
- 5.1 Regulatory Overview
- 5.2 Wireless Device Country Approvals
- 5.3 Health and Safety Recommendations
- 5.4 RF Exposure Guidelines
- 5.5 Power Supply
- 5.6 Wireless Devices - Countries
- 5.7 Radio Frequency Interference Requirements—FCC
- 5.8 Radio Frequency Interference Requirements – Canada
- 5.9 CE Marking and European Economic Area (EEA)
- 5.10 Waste Electrical and Electronic Equipment (WEEE)
- 5.11 TURKISH WEEE Statement of Compliance
- 6 Motorola Solutions Support Center
- 7 AP7131 Series ROHS Compliance
34 AP-7131 Access Point
4 Specifications
4.1 AP7131 Physical Characteristics
An AP7131 model Access Point has the following physical characteristics:
4.2 AP7131N Physical Characteristics
An AP7131N model Access Point has the following physical characteristics:
Dimensions 5.50 in. Depth x 7.88 in. Width x 1.10 in. Height
14 cm Depth x 20.32 cm Width x 2.79 cm Height
Housing Metal, plenum-rated housing (UL2043)
Weight 2.22 lbs
Operating
Temperature
-4°F to 122°F/-20°C to 50°C
Storage Temperature -40°F to 158°F/-40°C to 70°C
Humidity 5 to 95% RH non-condensing
Electrostatic
Discharge
15kV air, 8kV contact
Dimensions 5.50 in. Depth x 7.88 in. Width x 1.38 in. Height
14 cm Depth x 20.32 cm Width x 3.5 cm Height
Housing Metal, plenum-rated housing (UL2043)
Weight 2.7 lbs
Operating
Temperature
-4°F to 122°F/-20°C to 50°C
Storage Temperature -40°F to 158°F/-40°C to 70°C
Humidity 5 to 95% RH non-condensing
Electrostatic
Discharge
15kV air, 8kV contact
Dimensions 5.50 in. Depth x 7.88 in. Width x 1.38 in. Height
14 cm Depth x 20.32 cm Width x 3.5 cm Height
Housing Metal, plenum-rated housing (UL2043)
Weight 2.7 lbs