Draft #6 WORKABOUT PRO4 HAND-HELD COMPUTER (Windows Embedded Hand-Held 6.
Draft #6
Draft #6 i WORKABOUT PRO4 HAND-HELD COMPUTER USER GUIDE 8000295.
Draft #6 ii Workabout Pro4 User Manual This user manual supports model numbers 7528X and 7528XP which contains the approved radio module 21-148603-0B. The applicable FCC ID and Industry Canada numbers are listed below.
Draft #6 iii The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Motorola is under license. All trademarks used herein are the property of their respective owners.
Draft #6 iv Workabout Pro4 User Manual Revision History Changes to the original guide are listed below: Change Date -01 Rev A 1/2014 Description Initial release.
Draft #6 TABLE OF CONTENTS Table of Contents About This Guide About This Manual .......................................................................................................................... xi Text Conventions ............................................................................................................................ xi Overview of the Workabout Pro4 Hand-Held Computer .................................................................
Draft #6 ii Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Modifier Keys ..................................................................................................................................2-6 Activating Modifier Keys...................................................................................................... 2-6 Locking Modifier Keys .........................................................................................................
Draft #6 Table of Contents iii Uploading Data in a Docking Station..............................................................................................2-28 Using Microsoft ActiveSync............................................................................................................2-28 Using Windows Mobile Device Center...........................................................................................2-28 General Maintenance..........................................................
Draft #6 iv Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Creating and Converting Handwritten Notes to Text......................................................................3-22 Renaming a Note............................................................................................................................3-23 Recording Notes.............................................................................................................................3-23 Task Notification........
Draft #6 Table of Contents v Sound & Notifications...................................................................................................................... 4-12 Sounds Tab.....................................................................................................................................4-12 Notifications Tab .............................................................................................................................4-13 Connections Folder.......................
Draft #6 vi Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Utilities ................................................................................................................................ 4-49 Settings ............................................................................................................................... 4-49 Encryption.......................................................................................................................................
Draft #6 Table of Contents vii Charging a Spare Battery ...............................................................................................................5-6 Battery Charge Duration.................................................................................................................5-6 Charger LED Indicators..................................................................................................................5-6 Linking a Workabout Pro4 to a PC............................
Draft #6
Draft #6 ABOUT THIS GUIDE ABOUT THIS GUIDE About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Overview of the Workabout Pro4 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 About This Guide xi About This Manual This user manual describes how to configure, operate, and maintain the Workabout Pro4 Hand-Held Computer. Chapter : About This Guide provides a basic overview of the Workabout Pro4 Hand-Held. Chapter 1: Basic Operation describes the steps required to get the Workabout Pro4 ready for operation.
Draft #6 xii Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual WARNING These statements provide critical information that may prevent physical injury, equipment damage or data loss. Overview of the Workabout Pro4 Hand-Held Computer The Workabout Pro4 is a modular, industrial hand-held computer.
Draft #6 About This Guide • xiii Total Recall, TweakIt, Dr. Debug Wireless Data and Voice Communications • Bluetooth® - Integrated Bluetooth® V2.1 + EDR (standard) • WLAN - XWing2 802.11a/b/g/n WiFi (standard). Optional diversity antenna module available. • GPS - Optional GPS module (supports SBAS) • Optional Cinterion HSPA + WAN radio incl. GPS Receiver (Supports GLOSNASS) NOTE 802.11a/b/g/n and Bluetooth are available simultaneously.
Draft #6
Draft #6 CHAPTER 1 BASIC OPERATION BASIC OPERATION 1 Workabout Pro4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Workabout Pro4 Modules Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Documents Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Preparing the Workabout Pro4 for Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 The Battery . . . . . . . .
Draft #6
Draft #6 Basic Operation 1 - 3 Workabout Pro4 Features Figure 1-1 Front View of the Workabout Pro4 7528 Long with Alphanumeric Keyboard Speaker Microphone LED (Light Emitting Diode) Workabout Pro4 Modules Available To see a current list of Workabout Pro4 accessories and modules, go to the website at: (need website) http://www.psion.com/us/products/handheld.htm.
Draft #6 1-4 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use. Batteries can be charged using a variety of chargers and docking stations. For detailed information, see “Battery Details” on page 2-3. Replacing the Battery Pack IMPORTANT NOTE Always switch the unit off before changing the battery (see “Switching the Workabout Pro4 On and Off” on page 1-4).
Draft #6 Basic Operation 1 - 5 Switching the Workabout Pro4 Off • To switch off the Workabout Pro4, press the [Power] button. The Workabout Pro4 will automatically enter the Suspend state. IMPORTANT Turning off the hand-held does not result in a complete shutdown; rather, the unit enters a power-saving, “suspend” state. When the Workabout Pro4 is turned on from suspend state, operation resumes within a few seconds.
Draft #6 1-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Boot to BooSt If you choose Boot to BooSt, the BooSt menu is loaded. • Press and hold down the [FN/BLUE] key, [Power] button and [SCAN] key for a minimum of four seconds. • Press [1] to launch the OS.
Draft #6 CHAPTER 2 GETTING TO KNOW YOUR WORKABOUT PRO4 GETTING TO KNOW YOUR WORKABOUT PRO4 2 Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Battery Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Battery Swap Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6 2-2 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Customizing the Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16 The Today Screen Default Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Music. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Phone . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6 Getting to Know Your Workabout Pro4 2 - 3 Operating System • Microsoft® Windows® Embedded Hand-Held 6.5 Battery Details Workabout Pro4 Hand-Held Computer is available with the following Lithium-ion battery pack option: • 4400 mAh high-capacity battery – Model Number WA3010 • Super capacitor power backup Review the following sections for detailed battery information: • Installation: “Preparing the Workabout Pro4 for Operation” on page 1-3. • Power settings: “Power” on page 4-8.
Draft #6 2-4 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual IMPORTANT If your Workabout Pro4 fails to power up, consider the following troubleshooting options: The battery may be overheated (>60C°), a non-Motorola battery may be installed, or the battery may have fallen below the configured Suspend Threshold. See “Suspend Threshold and Estimated Battery Backup” on page 4-10 for details. To switch on the hand-held, you will need to replace the overheated battery.
Draft #6 Getting to Know Your Workabout Pro4 2 - 5 The [Power] Button The [Power] button in the lower left corner of the keyboard switches the unit on and off. Standard Keys The [ENTER] Key The [ENTER] key is used to execute the usual Enter keyboard functions. The [SHIFT] Key The [SHIFT] key is used to display uppercase alpha characters and to provide access to other symbols and functions on the numeric keyboards.
Draft #6 2-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Volume Control – [UP ARROW] [DOWN ARROW] The volume keys are located above the [UP ARROW] and [DOWN ARROW] and are labelled with blue icons the [UP ARROW] is labelled with a plus (+) symbol indicating volume increase while the [DOWN ARROW] is labelled with a minus (-) symbol indicating volume decrease. To increase the volume, press the [FN/BLUE] key followed by the [UP ARROW] key.
Draft #6 Getting to Know Your Workabout Pro4 2 - 7 Figure 2-2 Shift-State Indicator Icon – Locked/Unlocked Modifier Key Shift-state indicator icon Unlocked modifier key indicator Locked modifier key indicator Once a modifier key is unlocked or turned off, it is no longer displayed in the shift-state indicator icon. NOTE The locking function of the modifier keys can be changed so that pressing a modifier key once will lock it ‘on’.
Draft #6 2-8 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Macro Keys (Workabout Pro4 Long only) IMPORTANT Refer to “Macro Keys” on page 4-40 for details about creating macros. Workabout Pro4 Long units are equipped with 10 Macro keys. Macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys like the [ENTER] key, the [BACKSPACE] key, any function key and arrow key, etc. Alphanumeric keyboards have ten macro keys: [M1] to [M10].
Draft #6 Getting to Know Your Workabout Pro4 2 - 9 NOTE To choose the second, third or fourth alpha character assigned to a numeric key, you may want to lock the [FN/ORANGE] key ‘on’. Remember that depending on how your Workabout Pro4 is set up in the ‘One Shots’ tab, you may find that you need to press the [FN/ORANGE] key twice to lock it ‘on’. Refer to “OneShot/Lock” on page 4-39 for details. To choose the letter ‘b’: • Lock the [FN/ORANGE] key ‘on’, and press [2] twice.
Draft #6 2 - 10 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual The Display The Workabout Pro4 is equipped with display backlighting to improve character visibility in low light conditions. The backlight switches on when a key is pressed. Adjusting the Display Backlight To set the backlight intensity and the duration of time that the backlight will remain on, you’ll need to choose the Backlight icon. • Tap on Start>Settings and then, tap on System>Backlight icon.
Draft #6 Getting to Know Your Workabout Pro4 2 - 11 Calibrating the Touchscreen If your touchscreen has never been aligned (calibrated) or if you find that the stylus pointer is not accurate when you tap on an item, follow the steps below. • Tap on Start>Settings>System. Tap on the Screen icon. The General tab is displayed in which you can correct alignment and choose screen orientation (see “Screen Orientation” on page 2-13 for details).
Draft #6 2 - 12 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 Getting to Know Your Workabout Pro4 2 - 13 Screen Orientation In addition to screen calibration, the Screen icon allows you to determine how your screen will be oriented – portrait or landscape (right- or left-handed). • Tap on Start>Settings>System icon. • Tap on the Screen icon. • In the General tab, tap on the orientation that best suits the way in which you use your Workabout Pro4.
Draft #6 2 - 14 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Charge LED Behaviour Indication Slow blink (2 second period, 50% duty cycle) Charge temperature fault. Solid Orange Booting/resuming. Audio Indicators The Workabout Pro4 supports several audio options, including a Bluetooth headset. Sounds are emitted through the front receiver.
Draft #6 Getting to Know Your Workabout Pro4 2 - 15 • Use the stylus to tap on the appropriate icon to open files and folders, launch applications and programs, make selections, and so on. You can also use your finger rather than the stylus. • Tap and flick the stylus or your finger on the screen to scroll through the options on a screen. • Tap on the navigation bar to display additional icons.
Draft #6 2 - 16 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Navigation bar Start button Softkey bar Softkeys • Use the stylus or your finger to scroll to and highlight the option you want to work with. The highlighted option displays information specific to the applet. For example, highlighting the Calendar option lets you know if there are any appointments. • Tap on any highlighted option to display the associated dialog box.
Draft #6 Getting to Know Your Workabout Pro4 2 - 17 The Today Screen Default Options A list of options are available from the Today screen. Keep in mind that these can be altered using the method described above in “Customizing the Today Screen” on page 2-16. You can also refer to “Shell Settings” on page 4-57 for additional customization options. Pictures This option provides access to the Pictures & Videos applet. Refer to “Pictures & Videos” on page 3-16 for details.
Draft #6 2 - 18 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Setting the Alarm You can set a maximum of three alarms. • In the Alarms tab, tap on the Time or Day in the Clock & Alarms screen. An Alarm Settings screen is displayed. • To set the time, highlight the hours and then the minutes in the clock and use the arrow keys to increase or decrease the numbers, or type the hours and minutes directly from the keyboard or soft keyboard. • Type a description in the Description field.
Draft #6 Getting to Know Your Workabout Pro4 2 - 19 Menu softkey To compose and send a text message on your Workabout Pro4: • Tap on the Menu softkey, and choose New from the menu. • In the To field, type the name of the person to whom you want to send a text message, or to insert a number from your contacts list, tap on Menu>Add Recipient, and choose a name. • Tap your stylus in the message area, and type your message. • Tap on the Send softkey to deliver your message.
Draft #6 2 - 20 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Calendar of Upcoming Appointments This option is used to map out all your upcoming appointments, meetings and so on in the weeks, months and years ahead. NOTE You can synchronize the Calendar so that any meetings, appointments and so on are displayed on your Workabout Pro4 Today screen as well as on your PC.
Draft #6 Getting to Know Your Workabout Pro4 2 - 21 Figure 2-3 Appointment Detail Screen • In the Subject field, name the appointment. • Complete the remaining fields to reflect your appointment details. Adding Reminders If you want to be reminded in advance of an appointment: • Tap on the Reminder field, and choose Remind me from the drop-down menu.
Draft #6 2 - 22 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap in the checkbox next to the category to which you want to assign the appointment. • Tap OK. Your appointment is assigned to the category or categories you chose. NOTE You can create a new category by tapping on the New softkey at the bottom of the screen. Attendees This option allows you to define required and optional attendees for your meeting.
Draft #6 Getting to Know Your Workabout Pro4 2 - 23 Shift-State Indicator Icon The navigation bar at the top of the screen can also display the shift-state indicator icon. This icon indicates active modifier keys – [SHIFT], [ALT], [CTRL], [SYM] and [BLUE/FN]. Shift-state indicator icon When a modifier key is pressed, it is displayed in the shift-state indicator icon. In the example above, the [BLUE/FN] key was activated.
Draft #6 2 - 24 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual The Start Button The Start button provides access to a screen of applets available on your Workabout Pro4. • Tap on the Start button in the lower-left corner of the softkey bar to display your programs. Managing Files and Folders Windows Embedded Hand-Held 6.5 files are stored in folders and sub-folders that are accessible with File Explorer.
Draft #6 Getting to Know Your Workabout Pro4 2 - 25 Renaming, Copying, and Deleting a File • To access any of these functions, press and hold the stylus on the file you want to work with. A ring of dots is displayed followed by a pop- up menu. • Choose the appropriate command from the menu. Using Menus In Windows Embedded Hand-Held 6.5, the menu is located in the softkey bar at the bottom of the screen.
Draft #6 2 - 26 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Programs – Using Applications • Tap the Start button in the softkey bar to display the programs installed on your Workabout Pro4. Figure 2-4 Program Icons Opening an Application • Tap on a the Program icon to launch the associated program. Minimizing an Application • Tap on the X button in the lower-right corner of an application screen to minimize the application.
Draft #6 Getting to Know Your Workabout Pro4 2 - 27 Figure 2-5 Settings Icons Along with icons that provide information about your unit and allow you to adjust the appearance and behaviour of your Workabout Pro4, an additional group of icons is stored in three folders – Personal, System and Connections. Refer to Chapter 4: “Settings” for details about the options available to you. HomeVU Home VU allows the administrator to tailor how the Workabout Pro4 operates and the options the user can access.
Draft #6 2 - 28 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Uploading Data in a Docking Station The Desktop Docking Stations allow your hand-held to upload transaction data to a server computer when a radio link is not available. When Workabout Pro4 is properly inserted in a docking station, a dock icon is displayed in the navigation bar at the top of the screen.
Draft #6 Getting to Know Your Workabout Pro4 2 - 29 If the touchscreen is used in harsh environments, consider applying a disposable screen protector (RV6105). These covers reduce the clarity of the display slightly but will dramatically extend the useful life of the touchscreen. When they become scratched and abraded, they are easily removed and replaced. Do not to expose the touchscreen to direct sunlight for prolonged periods of time.
Draft #6 2 - 30 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Cleaning the Workabout Pro4 IMPORTANT Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean. To prevent damage to the touchscreen, use only your finger or the stylus (pen) supplied with your Workabout Pro4. • Use only mild detergent or soapy water to clean the hand-held unit. • Avoid abrasive cleaners, solvents or strong chemicals for cleaning.
Draft #6 CHAPTER 3 PROGRAMS PROGRAMS 3 Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3 Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3 The Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4 The Onscreen Phone Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6 3-2 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Editing a Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18 Creating a Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18 Using the Video Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-19 Windows Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20 Messenger (Windows Live) . .
Draft #6 Programs 3 - 3 Programs Workabout Pro4 programs are all available from the Start screen. • Tap on the Start button in the lower-left corner of the Today screen to display the Start screen. Tapping on an icon in this screen launches the associated applet. IMPORTANT For details about the options contained under the ‘Settings’ icon, refer to Chapter 4: “Settings”. Home Tapping on the Home icon in the Start screen displays the Today screen.
Draft #6 3-4 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual The Phone The Workabout Pro4 can be equipped with optional phone capabilities. NOTE The Phone option is only available on units equipped with the Cinterion PHS8-P GSM/GPRS/EDGE/UMTS/HSPA+ Radio. To access the phone pad on a unit that includes the phone option: • Tap on Start>Phone icon. The Onscreen Phone Keypad The onscreen phone keypad provides phone services like those you may find on your cellular phone.
Draft #6 Programs 3 - 5 Phone settings Directory assistance Hide/show keypad Menu To make a phone call: • Use the phone keypad to enter the phone number. Tap on [Talk] to connect the call. When you tap on the [Talk] button to connect to a phone number, the [Talk] button toggles to become the [End] button. When you’ve completed your call and want to disconnect: • Tap on [End] button on the onscreen phone keypad.
Draft #6 3-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Speed dial number Call softkey This dialog box lists the phone numbers and the speed dial key to which the phone number has been assigned. • Tap on the Speed Dial Number (the number to the left of the phone number you want to dial), or Tap on the Call softkey in the softkey bar at the bottom of the screen; the number is dialled for you.
Draft #6 Programs 3 - 7 A sequential speed dial key is automatically assigned in the Location field. You can tap on the arrows to the right of the Location field to change the auto assignment. Using the Contact List to Program a Speed Dial • Tap on Start followed by the Contacts icon. • Tap on the Contact to which you want to assign a speed dial number. • In the Summary screen, tap on Menu>Add to Speed Dial.
Draft #6 3-8 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Managing Phone Settings You can adjust phone settings such as the ring type and tone, choose phone services such as barring calls, and you can also determine network selections. Text Messages Tapping on the Text option in the Today screen displays this screen. This option allows you to compose, send and receive text messages using your Workabout Pro4.
Draft #6 Programs 3 - 9 The E-mail program is used to send and receive e-mail on your Workabout Pro4. It also provides access to text messages. To send and receive e-mail, you’ll need to synchronize your PC or connect to a Post Office Protocol 3 (POP3) or Internet Message Access Protocol 4 (IMAP4) mail server. For each of these methods, you need to set up an e-mail account with one exception – Outlook e-mail accounts are set up by default.
Draft #6 3 - 10 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Make certain that a check mark is displayed in the checkbox next to E-mail. Tap on OK. Once you check E-mail for synchronization, Outlook e-mail messages are synchronized as part of the general synchronization process. The next time you synchronize with ActiveSync, the e-mail in Outlook on your PC will be transferred to the Messaging program on your Workabout Pro4.
Draft #6 Programs • In the Windows Mobile Device Center, tap on Set up your device. • Make certain that a check mark is displayed in the checkbox next to E-mail. Tap on Next. 3 - 11 NOTE If an Exchange Server is detected, a screen is displayed where you can enter the Server address, your user name and so on, and sync the Workabout Pro4 with the Exchange Server directly over a cellular or wireless network when you are not connected to your PC. This is an optional step that you can skip.
Draft #6 3 - 12 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Keep in mind that you can also use your Contacts to choose an e-mail recipient provided an e-mail address is associated with the contact. • Tap Menu>Add Recipient, and then choose a contact from the list. • If you're sending an email to multiple people, use a semicolon (;) between addresses. Contacts Contacts are available with your e-mail, text messages, voice messages and your phone.
Draft #6 Programs 3 - 13 Searching for a Contact Type a contact name here Tap on an alpha group to narrow the search To search for a particular entry: • Tap on the Enter a name ... field, and type the name you are searching for in the Contacts list. • To narrow your search to names beginning with a particular letter, tap on the appropriate alpha character grouping.
Draft #6 3 - 14 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • When you’ve completed the information for the contact entry, tap on OK. The new contact is displayed in the Contacts list. Info Tab This tab allows you define a ring tone for a particular contact. You can also add additional addresses related to your contact (work and home), and information about your contact such as a job title, office location and fax number.
Draft #6 Programs 3 - 15 Internet Explorer You can connect to Internet Explorer in two ways: by connecting the Workabout Pro4 directly to the Internet or by connecting through your PC (see “ActiveSync®” on page 3-26). Browsing Web Sites There is little difference between the standard Internet Explorer found on your PC and that found on your Workabout Pro4, sometimes referred to as Pocket Internet Explorer. You can enter URLs, set a ‘home page’, turn images on and off, e-mail links to friends, and so on.
Draft #6 3 - 16 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual IMPORTANT Refer to “Calendar of Upcoming Appointments” on page 2-20 for details about this feature. Alarms Refer to “Time, Date and Alarms” on page 2-17 for details about this applet. Pictures & Videos The Pictures & Videos applet allows you to snap photographs and record video footage. It is also a photo and video viewing program. IMPORTANT The Pictures & Videos program can only display .bmp or .jpg formats.
Draft #6 Programs 3 - 17 Keep in mind that if there are no pictures stored on your Workabout Pro4 as yet, you’ll only see the Camera icon in this screen. • Tap on the Camera icon to activate the camera. The screen will display the image your camera is pointed at. (The camera is built into the back of the Workabout Pro4.) Photo Film Icon indicates the camera is active. Tapping on this softkey displays thumbnails of photos stored on the Workabout Pro4. • Frame the image in the Workabout Pro4 screen.
Draft #6 3 - 18 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on a thumbnail to open the photo. NOTE If you’ve stored your photos on a storage card, you’ll need to tap on the storage card icon to display your photos. Deleting a Photo • Press and hold the stylus on the thumbnail photo you want to delete to display a pop-up menu. Tap on Delete. • Confirm your choice when prompted. Editing a Photo • Tap on a thumbnail photo to open it. • Tap on Menu>Edit.
Draft #6 Programs Using the Video Recorder • Tap on the Camera icon. • In the bottom-right corner of the camera screen, tap on Menu>Video. • Press [ENTER] to begin recording. Video Recorder Icon Indicates that video is active. • To end the video, press [ENTER] again, or tap on the Stop softkey. NOTE When the ‘Video’ recorder is activated, a Menu is available to tailor the operation of the recorder, the quality of the recording, and so on.
Draft #6 3 - 20 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Windows Media Windows Media allows you to play music and videos on your Workabout Pro4. You can use Windows Media to play digital audio and video files that are stored on your Workabout Pro4 or on the web. • To work with this applet, tap on Start>Windows Media. For details about using this applet, refer to: http://www.microsoft.com/windowsphone/en-us/howto/wp6/music/windows-media-player-mobile.
Draft #6 Programs 3 - 21 New • Tap on the New softkey to display a blank note. Creating a Note Using the Soft Keyboard The soft keyboard icon is available by default. It is a replica of a standard keyboard. Use your stylus to type letters, numbers, symbols and so on. • When you’ve completed your note, tap on OK. Your note is automatically saved. The file name is the first line of the note if you used the keyboard – otherwise, it’s named Note1, Note2 and so on.
Draft #6 3 - 22 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Creating and Converting Handwritten Notes to Text To create a handwritten note using the transcriber: • Tap and hold the stylus on the soft keyboard icon to display the pop-up menu. • Choose Transcriber from the menu. When you choose Transcriber, you can write notes in your own handwriting. Workabout Pro4 converts the notes into typed text for you.
Draft #6 Programs 3 - 23 Renaming a Note • Press and hold the stylus on the file name in the Notes screen that you want to rename. In the pop-up menu, choose Rename/Move. • In the Name field, type the new name. NOTE Remember that if you want to use the soft keyboard to type a new name, you’ll need to tap and hold the stylus on the Transcriber icon, and choose Keyboard from the popup menu. You can also move the note to a new Folder and/or a new Location.
Draft #6 3 - 24 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on OK to save the recorded note. A speaker icon is displayed in the note indicating the presence of a recording within the note. • To play the recorded note, tap on the speaker icon. • Tap on Menu, and choose View Recording Toolbar again to turn off the feature. Task Notification Tasks lets you create lists of entries representing your responsibilities, upcoming projects, and so on.
Draft #6 Programs • 3 - 25 Press [ENTER] to add the task to your list. Edit Editing a Task • Tap on a task in the task you want to edit. Tap on the Edit softkey in the softkey bar to display a detailed task screen where you can define task characteristics. Figure 3-1 Task Details Screen Each of the nine items in this screen, when tapped, displays a drop-down menu where you can choose from a list of options. • Once you’ve completed all the appropriate fields, tap on OK to save your changes.
Draft #6 3 - 26 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual NOTE You can also tap on the Notes tab to add additional information about the task you are defining. Deleting a Task • Press and hold the stylus on a task until a pop-up menu is displayed. • Tap on Delete Task. Marking a Task as Completed • In the Tasks list, tap the checkbox next to the items that are completed. Sorting Tasks • Tap on the Menu softkey, and tap on Sort By.
Draft #6 Programs 3 - 27 By connecting the Workabout Pro4 to a PC through your desktop docking station and running ActiveSync or Mobile Device Center on your PC, you can view Workabout Pro4 files, drag and drop files between the Workabout Pro4 and the PC, connect to the Internet, and so on.
Draft #6 3 - 28 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual For a GPRS, 1xRTT or dialup connection: • Tap on Start>Settings>Connections. Tap on the Connections icon. • Under My Work Network, tap Add a new modem connection. • Type a name for the connection, and choose Cellular Line (GPRS), or for 1xRTT connections, choose Cellular Line. Tap on Next. • Type the phone number or access point name provided by your service provider, and tap Next.
Draft #6 Programs • 3 - 29 In the Devices and Printers screen, tap on the Add a device button. Your Workabout Pro4 is displayed in the Add a device screen. • Double-tap on your Workabout Pro4 icon. You are asked to choose a pairing option – Create a pairing code for me, or Enter the device’s pairing code. • If a pairing code has been assigned to your Workabout Pro4, choose Enter the device’s pairing code, and type the Workabout Pro4 passcode on your PC and on your Workabout Pro4.
Draft #6 3 - 30 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on the Search softkey key. The results of your search are displayed in the Search screen. Office Mobile This icon contains the following abridged Microsoft programs: Excel Mobile, OneNote Mobile, PowerPoint Mobile, SharePoint Workspace Mobile and Word Mobile. • Tap on Start>Office Mobile. Excel Mobile Excel Mobile is an abridged version of Microsoft Excel, an electronic spreadsheet program.
Draft #6 Programs 3 - 31 • If a list of workbooks is displayed rather than a new sheet, you’ll need to create a new workbook. To create a workbook: • In Excel Mobile, tap the Menu>File>New. OneNote Mobile You can use OneNote Mobile to take notes wherever you are and then synchronize your notes with a notebook section in the OneNote version on your PC. For example, you can: • Snap pictures of business cards on your Workabout Pro4 and then bring them into OneNote on your PC.
Draft #6 3 - 32 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on New to create a note page. Begin typing. • When you complete your note, tap on Done. NOTE Remember that you can tap on the Menu softkey to Undo typing, add Formats (Bold, Italic, Underline, Strikethrough), and include Lists (Numbered, Bulleted, Clear). Using the OneNote Menu Tapping on Menu displays a list of options to help you work with the OneNote Mobile applet.
Draft #6 Programs 3 - 33 Press [ENTER] to snap a photo that is automatically inserted into your note. • Insert Picture: Tapping on this command automatically displays your My Pictures folder where you can tap on an existing picture to insert it into your note. • Insert Recording: When you tap on this command, a recording panel is displayed. Cancel Save Play Stop Record Tap on the Record button to record your message. Tap on Stop when you’ve completed your message.
Draft #6 3 - 34 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual To save your message, tap on OK. An audio icon is displayed in your note. You can tap on it to listen to your message. Synchronizing Workabout Pro4 One Note With PC OneNote • Connect the Workabout Pro4 to your PC using either a USB cable or Bluetooth.
Draft #6 Programs IMPORTANT 3 - 35 To avoid problems, work on copies of .doc files. In addition, keep in mind that you can use the Terminal Services Client program to log onto a desktop PC that is also running Terminal Services, and then you can use any program on your PC, including Microsoft Word (rather than Word Mobile). Refer to “Remote Desktop Mobile” on page 3-37. PowerPoint Mobile PowerPoint Mobile works just like the desktop version that may be installed on your PC.
Draft #6 3 - 36 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual IMPORTANT For details about this application, refer to “HomeVU” on page 4-56. Modem Link Modem link allows you to use the GPRS connectivity on your phone to connect your laptop or PC to the Internet.
Draft #6 Programs 3 - 37 Remote Desktop Mobile This program allows you to log onto a Windows Terminal Server and run the desktop programs from the server on your Workabout Pro4. Connecting to a Terminal Server • Tap on Start>Remote Desktop Mobile • In the Remote Desktop screen, choose a Computer from the drop-down menu. • Type your User name, Password, and Domain (if required). Tap on Connect.
Draft #6 3 - 38 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual The WiFiConnect A.R.C. utility provides a quick method to configure a device for use on a private network, primarily for use with Active Remote Configuration (A.R.C.). WiFiConnect A.R.C. configures the default WiFi interface. The WEP key is set to PsionPsion123. The SSID is set to Psion. The default interface becomes the active interface.
Draft #6 CHAPTER 4 SETTINGS SETTINGS 4 Overview of Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Motorola Software Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Microsoft Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Clocks & Alarms . . . . . . . . . . . . . . . . .
Draft #6 4-2 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Modem Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22 Advanced Modem Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24 Domain Enroll. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-25 Network Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-26 Changing Network Card Settings . . . . . . . . . . .
Draft #6 Settings 4 - 3 Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55 Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55 PartnerUp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-56 HomeVU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-56 HomeVU Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Settings 4 - 5 Overview of Software Motorola Software Advantage Motorola Software Advantage is a collection of applications and features designed to support system administrators and end users. These tools enable enterprises to customize the product to meet their needs and to maximize productivity. • App Launch KeysHomeVU • Battery HealthTweakIt • Bluetooth Manager • DataWedgeManage Triggers • Dr.
Draft #6 4-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Clocks & Alarms Refer to “Time, Date and Alarms” on page 2-17 for details about this applet. Lock This option allows you to assign a password to protect access to your phone service. • Tap on Start>Settings, and then tap on the Lock icon. It is critical that you store your password in a safe place. If you forget it, a ‘clean start’ must be performed by certified personnel.
Draft #6 Settings 4 - 7 Appearance Tab – Changing the Theme (Background) The Appearance tab allows you to change the background appearance of the Today screen. • Tap on the theme or background you want to use. Tap on OK to assign the background you’ve chosen to your Workabout Pro4. NOTE You can also use a personal picture as your background. Tap on the checkbox to the left of Use this picture as the background, and tap on the Browse button to locate your picture.
Draft #6 4-8 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Once the recipient clicks on OK to accept the file, the device you chose is marked as Done. Items Tab – Customizing the Today Screen The items you see in the Today screen are Windows Default items. The Items tab allows you to customize the screen to suit your purposes. NOTE Refer to “Customizing the Today Screen” on page 2-16 for details about this screen.
Draft #6 Settings 4 - 9 Battery Power This tab monitors and displays the current battery capacity of the battery installed in the Workabout Pro4. Advanced Tab This tab allows you to tailor how long the Workabout Pro4 can remain idle before the screen is turned off while running on battery power and also on external power. NOTE The options in the screen behave like Suspend mode.
Draft #6 4 - 10 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual This tab lists the specifications and battery capacity status of the battery installed in the Workabout Pro4. This is a view-only screen. Suspend Threshold and Estimated Battery Backup The Estimated Battery Backup is the amount of battery power that has been reserved or set aside to protect data until a fully charged battery can be installed in the Workabout Pro4.
Draft #6 Settings 4 - 11 Battery Health The Battery Health tab provides an estimate of battery health based on a number of different measurements, beyond battery capacity. IMPORTANT • The Battery Health Meter is an estimate and should not be depended on to provide a 100% account of battery condition. In the scrolling tab bar, tap on the Battery Health tab.
Draft #6 4 - 12 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Show Popup UI on Device-Resume The drop-down menu attached to Show Popup UI on Device-Resume allows you to determine when the battery status pop-up user interface (UI) will appear based on the battery health. Edit – Changing Ratings Text You can customize the ratings text with the Edit button.
Draft #6 Settings 4 - 13 Notifications Tab Tap here to play your ring choices Tap here to end the ring test This tab allows you to choose an event, and for each event, choose the audio notification or sound that the Workabout Pro4 will emit for that event. For example, suppose you choose Wireless network detected from the Event: drop-down menu. If you check Play sound, the unit will emit an audible sound when a network is detected.
Draft #6 4 - 14 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Bluetooth Setup Bluetooth is a global standard for wireless connectivity for digital devices and is intended for Personal Area Networks. The technology is based on a short-range radio link that operates in the ISM band at 2.4 GHz. When two Bluetooth-equipped devices come within a 10 meter range of each other, they can establish a connection.
Draft #6 Settings • 4 - 15 To discover and list all Bluetooth devices in range of the Workabout Pro4, tap on the Scan button in the softkey bar at the bottom of the screen. The Workabout Pro4 scans for Bluetooth devices within a 10 meter range. Any Bluetooth devices within range appear in the Bluetooth list box. Any existing devices previously discovered and listed will also be displayed.
Draft #6 4 - 16 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual The drop-down menu at the top of the Device tab allows you to limit the scope of the scan to a particular type of device. If, for example, you choose Computer from this menu, only computers within range of the Workabout Pro4 are listed in the Device tab. Choosing All lists all detected devices.
Draft #6 Settings • Click in the checkbox to the left of the service to activate it. • Click on Done. 4 - 17 NOTE If you choose a service requiring additional information, associated dialog box is automatically displayed where further details can be completed. Once you’ve completed the information: • Tap on Next and then in the Services screen, tap on OK.
Draft #6 4 - 18 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual OBEX OPP server enables the Object Push Profile server. A warm reset must be performed on the Workabout Pro4 after a change is made to this option. The OPP Server allows other Bluetooth devices to send files to this device. • Tap on the checkbox to activate the server – the associated port name is displayed beside the server name. Mode Tab When Turn on Bluetooth is checked, Bluetooth features are available.
Draft #6 Settings 4 - 19 Paired Tab This tab lists all paired devices and their corresponding services. The format of the name is :. Additional information may appear in this screen such as the Port Numbers for Serial Profiles service. • Tap and hold down the stylus on an item in the Paired tab to display an associated pop-up menu. This is a service-dependent menu – that is, it varies slightly depending on the service chosen in the Servers tab.
Draft #6 4 - 20 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual HSP/HFP (Headset Profile/Hands-Free Profile) Service Commands The HSP (Headset Profile) allows users to connect their device to Bluetooth enabled headsets and other audio devices. HSP/HFP services provide the following unique menu options: • Connect Audio establishes an audio connection to the Bluetooth headset. • Disconnect Audio disconnects the audio connection from the Bluetooth headset.
Draft #6 Settings 4 - 21 NOTE If you are using another device to connect to the Internet, you can choose a different modem from the drop-down menu. 5. Make certain that the phone is discoverable. Some phones also need to be pairable in order to accept a bonding request. Refer to your phone documentation for additional information. 6. If the phone appears in the My Connections list, skip to step 13. If not, go to step 7. 7.
Draft #6 4 - 22 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual You’ll need to tap on Start>Settings, and then tap on the Connections folder icon to display the connections applets. 1. In the Connections screen, tap on the Connections icon. NOTE In the Connections window, the Tasks tab is used to create new connections and manage existing ones. The Advanced tab allows you to choose a network.
Draft #6 Settings 4 - 23 3. In the Make New Connection screen, type a name for the connection. 4. In the drop-down menu under Select a modem, tap on your modem type. WARNING If your modem is not listed in the drop-down menu, choose Hayes Compatible on COM1. 5. In the My Connections screen, enter the phone number exactly as you want it dialed. If, for example, you need to dial 9 for an outside line, enter 9 at the beginning of the phone number. 6. Tap on the Next button.
Draft #6 4 - 24 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual 7. Type the User Name, Password and Domain Name as provided by your ISP or network administrator. NOTE Generally, you will not need to change any of the Advanced settings. For information about Advanced Modem Settings, review the next section. Changes to Advanced settings are only required in the following instances: - To change the baud rate settings, dialing string commands or credit card options. - To change port settings.
Draft #6 Settings 4 - 25 Servers requiring assigned IP addresses may also need a way to map computer names to IP addresses. The Workabout Pro4 supports a variety of name resolution options: DNS, Alt DNS, WINS and Alt WINS. Your ISP or network administrator can determine which name resolution you need, and can also provide the server address. In addition, you will want to ask if alternate addresses are available. An alternate address may allow you to connect when the primary server is not available.
Draft #6 4 - 26 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Enter your enrollment password – supplied by your company's network administrator or generated from your company pre-enrollment wizard. • Type your company e-mail address and the enrollment password provided by your network administrator. NOTE If you uncheck Automatically discover server, a Server field is displayed where you must manually enter the server name.
Draft #6 Settings 4 - 27 • If necessary, use a network cable to connect the network card to your network. Refer to the documentation shipped with your network card for details. • To activate the connection, launch the desired program (e.g., Internet Explorer). The Workabout Pro4 will connect automatically. Changing Network Card Settings • If you use your network card in two locations like work and home, you’ll need to change the network to which the network card connects.
Draft #6 4 - 28 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Under My Work Network, tap on Add a new VPN server connection. • In the Name field, type a name for this connection. • In Host name/IP, type the VPN server name or IP address. • Tap on the VPN type radio button next to the type of authentication for your Workabout Pro4: IPSec/L2TP or PPTP. Your network administrator will let you know which option applies to your unit. • Tap on Next.
Draft #6 Settings 4 - 29 Tap here • To launch a connection from this screen, press and hold the stylus on the connection you want to activate. Choose Connect from the pop-up menu. • To delete a connection, press and hold the stylus on the connection you want to delete. Choose Delete from the pop-up menu. NOTE You can also create a new connection by tapping on the New button. To make changes to the settings for this connection, tap on Edit.
Draft #6 4 - 30 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual To set up the proxy server connection manually, you’ll need the following information: proxy server name, server type, port, type of Socks protocol used, and the user name and password. • Tap Start>Settings. Tap on the Connections tab followed by the Connections icon. • Under My Work Network, tap on Set up my proxy server.
Draft #6 Settings 4 - 31 Private networks are used for work-related activities. Internet networks are used for home connection to your ISP. The My Work Network settings are used for private network connections (corporate networks), while My ISP settings are used for Internet network connections. When you use programs such as Internet Explorer, your Workabout Pro4 automatically connects using private network settings under My Work Network or Internet settings under My ISP, depending on specifications.
Draft #6 4 - 32 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Connecting to the Internet To connect to the Internet on a WLAN when using Fusion Wireless Companion, ensure that the network card settings is set to Internet: • Ensure the Fusion is enabled and a profile is configured. • Tap on Start>Settings>Connections>Wi-Fi. • In the My network card Connects to drop-down menu, choose The Internet. • Tap on OK.
Draft #6 Settings Application 4 - 33 Description Wireless Diagnostics Provides tools with which to diagnose problems encountered with the wireless connection. Log on/off Displays the Network Login dialog box used to log on to a particular profile or to log off the currently active profile. Fusion Help Displays extensive on-device Help. • Tap on Manage Profiles.
Draft #6 4 - 34 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • In the Authentication drop-down menu, choose None. • Tap Next to display the Encryption dialog box. • Choose an Encryption Type from the drop-down menu. • Tap Next to display the IPv4 Address Entry dialog box. • Ensure that all three items are checked. Tap on Next. NOTE These IPv4 Address Type options are enabled (checked) by default.
Draft #6 Settings 4 - 35 Resetting the Radio to Default Factory Settings Resetting your unit, including a clean start, will not return the radio settings to the default values. To reset the radio to factory settings: • Tap on Start>Wireless Companion>Wireless Launch to display the Fusion Launcher screen. • In the Fusion Launcher screen, choose Options. • In the drop-down menu, choose Data Management. Tap on the Reset Options and Reset Datastore buttons, and tap on OK.
Draft #6 4 - 36 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Personal Folder • Tap on Start>Settings>Personal icon. App Launch Keys This icon allows you to map a key to an application so that you can then launch the application from a single key-press. • Tap on Start>Setting>Personal>App Launch Keys icon. To assign an application key: • Tap the Add button.
Draft #6 Settings • 4 - 37 Press the key you want to use to launch an application. (If an unsupported key is pressed, a message appears on this screen letting you know.) The cursor moves to the App field and a new screen is displayed where you can choose the application to which you want to assign the application key. If you need to, you can Browse through the information in your hand-held until you locate the application you want to launch. • Once you’ve selected the file you want to map, tap on OK.
Draft #6 4 - 38 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • If you need to Edit, Remove or Add another App Launch Key, you can do it from this final screen. Otherwise, tap on OK to save your Application Launch Key. • To launch the application you chose, press the application key you assigned. Buttons A number of apps are included under this icon. • Tap on the Start>Settings>Personal>Buttons icon to display the apps.
Draft #6 Settings 4 - 39 Sliding the Repeat rate bar to the left slows the rate at which an [Up/Down] button repeats when pressed. Sliding the bar to the right increases the key repeat rate. OneShots The options in this tab allow you to determine how modifier keys on your Workabout Pro4 behave. For each modifier key – [ALT], [SHIFT], [CTRL], [FN/ORANGE] and [FN/BLUE] – you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock.
Draft #6 4 - 40 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Macro Keys A macro key is a single keypress that can be configured to output up to 200 characters (including [ENTER], [BACKSPACE], [DEL], function keys, arrow keys, etc.). This feature can save time and effort when entering frequently used key sequences. For example, a macro key can be programmed to output a standard signature, such as “Sincerely yours, Bob” with a single keypress.
Draft #6 Settings • 4 - 41 Tap on OK to save your macro key assignment. Executing a Macro • To execute a macro, press the key to which you’ve assigned the macro. NOTE Keep in mind that if you plan to program additional macros beyond the Macro keys on your keyboard, or if your keyboard is not equipped with dedicated macro keys, you will need to use “Scancode Remapping” on page 4-42 to assign a keyboard key that will act as a macro key.
Draft #6 4 - 42 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on the Add/Edit button. • Highlight a value in the Unicode mapping list. • Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key. NOTE To add a shifted state – [SHIFT] and/or [CTRL], tap on the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’. Removing Unicode Values • In the Unicode Mapping tab, highlight the item you want to delete, and tap on the Remove button.
Draft #6 Settings 4 - 43 If the scancode is remapped to a function or a macro, the first and second columns remain blank while the third column contains the function name or macro key number (e.g., Macro 2). Adding a Remap To add a new remapping: • Tap the Add button at the bottom of the dialog box. The Remap Scancode dialog box is displayed. • Type the scancode in hexadecimal in the field labelled Scancode. NOTE The Label field displays the default function of the scancode you are remapping.
Draft #6 4 - 44 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Lock Sequence Tab The Lock Sequence tab allows you to lock the hand-held keyboard to prevent keys from being pressed accidentally when, for example, the unit is inserted in a holster. • To lock the keyboard, tap in the checkbox next to Enable key lock sequence. • Tap in the checkbox next to Keyboard locked at startup. • In the Key sequence drop-down menu, choose the key sequence you need to type to unlock the keyboard.
Draft #6 Settings 4 - 45 About Tapping on Start>Settings>System tab, and then the About icon displays a grouping of tabs that provide device information. Version Tab This tab outlines the Windows Embedded Handheld 6.5 Professional version, processor information, memory size and a description of the expansion card, if one is in use. Device ID Tab This tab provides fields in which you can assign a Device name and Description (optional) for the Workabout Pro4.
Draft #6 4 - 46 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on the drop-down menu, and choose the number of seconds or minutes the backlight will remain on when the hand-held is idle. • To Turn on backlight when a button is pressed or the screen is tapped, tap in the checkbox to the left of this option. External Power Tab This tab determines the behaviour of the backlight when the hand-held is using external rather than battery power.
Draft #6 Settings 4 - 47 Your Workabout Pro4 has certificates already preinstalled in the unit. Personal certificates establish your identity, intermediate certificates, as the name suggests, identify intermediate certification authorities and root certificates establish the identity of the servers with which you can connect. Choosing a Certificate Normally, certificates already configured for your network are chosen automatically by the Workabout Pro4.
Draft #6 4 - 48 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Root Certificates • To view details about a certificate – who issued the certificate, to whom it was issued, the issue date and the expiry date – tap on a certificate in the list. • To delete a certificate, tap and hold the stylus on a certificate. In the pop-up menu, tap on Delete. Contrast Tapping on the Contrast icon displays a screen in which you can tailor the screen contrast.
Draft #6 Settings • 4 - 49 Tap on Start>Settings>System. Tap on the Dr. Debug icon. Status This tab indicates the status (on/off) of the tools. Tapping on Browse logs displays error logs for your review. Utilities There are a number of utilities available through Dr. Debug. The NetLog utility is used to log network traffic. The RilLog utility captures Radio Interface Layer (RIL) debug outputs.
Draft #6 4 - 50 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • To change the location where debug information will be stored, tap on the button to the right of the Log Folder option. Encryption This option allows you to encrypt the data on your storage card. • Tap on Start>Settings>System tab>Encryption icon. Error Reporting Error Reporting allows you to enable or disable Microsoft error reporting prompts. • Tap on Start>Settings.
Draft #6 Settings 4 - 51 You can go to: http://www.microsoft.com/windowsphone/en-gb/howto/wp7/web/use-maps-to-find-a-place.aspx if a map-viewing program is not included with your Workabout Pro4, and copy the file to your Workabout Pro4. • Tap on the Hardware tab, and set the GPS hardware port to COM2. Set the Baud rate to 4800. Manage Triggers Manage Triggers allows you to configure how barcode scanners and other devices are triggered.
Draft #6 4 - 52 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap on Start>Settings>System>Manage Triggers icon. Trigger Mappings A trigger mapping is an association between a particular key on the keyboard and a driver or application, the module(s) – sometimes referred to as “trigger consumer(s)” – of the trigger source. Along with keyboard keys, trigger sources can also be grip triggers, external hardware triggers or software-based.
Draft #6 Settings 4 - 53 OK The OK button in the Manage Triggers screen saves all changes made. If the [ESC] key is pressed, all changes are discarded. Add and Edit Trigger Mapping • Tap on Add to add a new trigger map, or tap on Edit to edit an existing trigger map. Trigger Key This drop-down list allows you to specify the source of the trigger events, such as the Grip Trigger, Left Scan, etc., for the trigger module selected.
Draft #6 4 - 54 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual with the Up/down type has also been configured for the same source, it will only receive the first set of trigger events. Module to Trigger This identifies the driver or application receiving the trigger presses. Show All Modules By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed.
Draft #6 Settings 4 - 55 Storage Card The Storage Card screen indicates the total storage card or RAM disk memory along with the amount in use. Microphone Use this dialog box to adjust the gain for the specific microphones associated with your hand-held. • Tap on the drop-down menu, and choose the microphone for which you want to adjust the gain. • Slide the tab at the top of the dialog box to the left to decrease the gain and to the right to increase the gain.
Draft #6 4 - 56 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Tapping on the Default button sets the current microphone you’ve chosen to the default gain. Tapping on Default All sets all microphones listed to their default gain. PartnerUp Tapping on this icon displays a number of pre-loaded applications. Tapping on an app in the list takes you to an associated web site. The operator can then install the application.
Draft #6 Settings • 4 - 57 Type a New password, and then re-enter it in the Confirm new password field. NOTE Once an administrative password is assigned, each time HomeVU is launched, a dialog box will be displayed requesting the password. HomeVU Menu The HomeVU menu provides access to the categories to help you tailor the look and operation of the Workabout Pro4 for the user.
Draft #6 4 - 58 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Tap in the checkbox next to each application you want displayed on the Today screen. Once the Workabout Pro4 is set to User Mode, the selected items from the Application screen are listed in the Today screen. A HomeVU Access screen, the screen in which you can switch from Administrator to User Mode, is displayed automatically once you’ve finished making changes and have tapped on OK.
Draft #6 Settings 4 - 59 Tap here The View drop-down menu at the top of this screen displays the storage areas in the Workabout Pro4. Tapping on a storage area – Windows for example – displays the applications you can add to the Today screen from that storage area.
Draft #6 4 - 60 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Advanced Tab This tab provides a number of options to restrict what is available on start up. Start Button and Notification Restrictions The drop-down menu at the top of the Advanced tab allows you to limit access to the Notifications at the top of the screen and the Start button at the bottom of the screen.
Draft #6 Settings • 4 - 61 Tap in the checkbox next to Administrator access in Start Menu to deselect it. The x should not be present in the checkbox. The Administrator Key Sequence drop-down menu provides three key sequences you can use to gain access to HomeVU when it is not accessible from the Start screen. NOTE If you disable “Administrator access in Start Menu” or if you “Disable Start”, the only way to access HomeVU or the Start screen applications is to type an “Administrator Key Sequence”.
Draft #6 4 - 62 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Startup program • Tap on OK. NOTE Remember that changes do not take effect until the Workabout Pro4 is set to User Mode and the unit is reset. Phone Tab The Phone tab allows you to define the phone buttons accessibility on the Workabout Pro4 keyboard by choosing an item from the Configure the Phone Dialer buttons drop-down menu.
Draft #6 Settings 4 - 63 Application Tab Tapping in the View menu displays a drop-down menu where you can define restrictions for each storage area of the Workabout Pro4. Restricted items are marked in the checkbox to the left – in the sample screen above, solitaire.exe is restricted. Advanced Tab The Advanced tab lists system features you can block from user access. Tapping in the checkbox to the left of a feature adds a check mark indicating it is blocked.
Draft #6 4 - 64 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Control Panel Settings This options allows you to tailor items displayed in both the Settings screen and in the Today screen. NOTE Remember that changes do not take effect until the Workabout Pro4 is set to User Mode and the unit is reset. Refer to “Activating a Change – User Mode” on page 4-66.
Draft #6 Settings IMPORTANT 4 - 65 A copy of this file should also be saved in a central repository for all .xml files with a predefined name so that other utilities can locate it. Tapping on the Export button displays an Export Settings screen. The default Name – HomeVU_Settings – can be changed by the administrator even after it has been saved. The .xml file contains all of the HomeVU configured settings, including the Administrator Password.
Draft #6 4 - 66 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual • Whether choosing to import or export files, the same file location options will be listed. Following the action, a message stating the success of the operation and the location of the file is displayed. • With the exception of the password, changes made to settings take effect only after a warm reset. If further changes to the configuration are made, they will overwrite the changes caused by the import operation.
Draft #6 Settings • 4 - 67 Tap on the drop-down menu to choose your language and region. Once you’ve selected a language and region, you may need to adjust the way numbers, currency, the time and the date appear in your Workabout Pro4. • Tap on the tab associated with each of the items, and choose how each item should be displayed on your Workabout Pro4. Remove Programs • Tap on Start>Settings. Tap on the System icon followed by the Remove Program icon.
Draft #6 4 - 68 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual This icon allows you to align (calibrate) your touchscreen, turn ClearType on and off and adjust the size of the text displayed on the Workabout Pro4 screen. IMPORTANT Refer to “Calibrating the Touchscreen” on page 2-11.
Draft #6 Settings • 4 - 69 End Task: To shut down an application, highlight the program in the list, and tap on the End Task softkey in the softkey bar at the bottom of the screen. Task Manager Menu The Task Manager menu provides additional options to help you manage your applications. • Tap on the Menu softkey at the bottom of the screen. • Switch To: Makes the highlighted application active. • End All Tasks: Shuts down all applications listed.
Draft #6 4 - 70 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual or a clone (the administrator can store different configurations for different uses to clone to other hand-held computers). NOTE Total Recall works differently (e.g. restore on cold boot or on clean boot) on different OS platforms and versions (e.g. Windows CE 5.0, 6.0, Windows Mobile, Windows Embedded Hand-held).
Draft #6 Settings IMPORTANT 4 - 71 Any profile not stored in persistent memory (Application directory (Flash Disk), external USB drive) will be erased during a clean boot; therefore, you should store profiles on a persistent drive. When performing an autorestore, the program only searches for the profile located in the \Application\ or \Flash Disk\TotalRecall folder. If you store your profile anywhere else it will not be restored. Only one profile can reside in that folder. - Tap on Start.
Draft #6 4 - 72 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Managing Profiles You can view profiles and choose profile options from the menus in this section. Viewing a Profile • Tap on the Manage Profile button to see your list of profiles. Highlight a profile, and then you can choose to View the Profile Summary and go on to the next menu, Profile Details.
Draft #6 Settings 4 - 73 • Next, tap on the option button you want to use: • Restore Now – restores the profile immediately. If you are restoring a profile that is a backup or Full Clone, the computer will clean reset first; if the profile is a Settings Only Clone, it will not. • Set for AutoRestore – creates a profile that is automatically restored following a cold reset or a clean start. The profile is stored in the \Application\ or \Flash Disk\TotalRecall folder.
Draft #6 4 - 74 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual USB drive prepared for cloning Autorun installation on next Workabout Pro Deleting a Profile • In the Total Recall home screen, tap on Delete Profile. • Highlight the backup you want to delete, and tap on the [-->](Next) button. A warning pop-up screen appears asking if you’re certain that you want to delete this file. • Tap on the Yes to delete the file. TweakIT • Tap on Start>Settings>System.
Draft #6 Settings 4 - 75 This utility allows you to ‘tweak’ or adjust system settings such as the interface, network and servers. Advanced CE Services Settings FTP Server This option is enabled by default to allow file transfers. Keep in mind that data transfer in either direction is restricted to the Temp folder – that is, files are always loaded from the FTP Server to the Temp folder and from the Temp folder to the FTP Server.
Draft #6 4 - 76 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Advanced Interface and Network Settings Enable IPv6 This option allows you to enable Internet Protocol, version 6, that has been published to use 128-bit IP address (replacing version 4). Modem Logging When this option is enabled, the Workabout Pro4 logs AT commands (e.g., dial-out information, password string, etc.) that the administrator can monitor for debugging purposes. Modem commands are stored in: \MdmLog.txt.
Draft #6 Settings 4 - 77
Draft #6 4 - 78 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 Settings 4 - 79
Draft #6 4 - 80 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 Settings 4 - 81
Draft #6 4 - 82 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 CHAPTER 5 PERIPHERAL DEVICES & ACCESSORIES PERIPHERAL DEVICES & ACCESSORIES 5 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3 Chargers and Docking Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3 Installation – Chargers and Docking Stations . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Peripheral Devices & Accessories 5 - 3 Carrying Accessories There are a variety of carrying accessories to help the operator work safely and comfortably with the Workabout Pro4. Carrying Accessory Model Number Shoulder Strap for carrying case CV6021 Carry Case -Workabout Pro4 Long version Standard WA6080 Pouch Nylon WA6084 IMPORTANT Do not use adhesives such as Loctite to secure screws on carrying accessories. These chemicals may damage the plastic casing.
Draft #6 5-4 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Power Consumption Considerations Check to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit. Operator Controls Workabout Pro4 docking stations and chargers have no operator controls or power switches.
Draft #6 Peripheral Devices & Accessories 5 - 5 Figure 5-1 Desktop Docking Station Workabout Pro44 Charge Well Release Button Connector Pins LED (Indicates charge status of a spare battery inserted in the rear charge well of the docking station.) NOTE The desktop docking charger is shipped with its own user manual. It is critical that it be reviewed for additional information and updates.
Draft #6 5-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Charging a Battery Installed in the Workabout Pro4 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Insert the DC power cable to the DC IN socket on the desktop docking station. Plug the pronged end of the cable into an AC outlet.
Draft #6 Peripheral Devices & Accessories 5 - 7 Linking a Workabout Pro4 to a PC The desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station. NOTE For details about data transfer through Windows XP and ActiveSync and through Vista, refer to “Data Transfer Between the PC & the EP10” on page 29. To link the Workabout Pro4 to a PC: • Insert the hand-held in the desktop docking station.
Draft #6 5-8 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Bluetooth Peripherals The Workabout Pro4 is equipped with a Bluetooth radio, making it is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners, printers, and so on. The range of the Bluetooth radio is limited to approximately 5 meters. Motorola provides built-in support for the Bluetooth peripherals listed below.
Draft #6 APPENDIX A PORT PINOUTS APort Pinouts LIF (Low Insertion Force) Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Battery Contact Pinout – WA3010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Positive Female Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Port Pinouts LIF (Low Insertion Force) Pinout PIN # Signal Name 1 Ground 2 Ground 3 USB Host Data Plus, For connecting USB devices 4 USB Host Data Minus, For connecting USB devices 5 USB Host Power, for powering USB devices (5V, 100mA Max) 6 DC Power in, for supplying power to Workabout Pro4/ charging battery (5V, 3A) 7 DC Power in, for supplying power to Workabout Pro4 / charging battery (5V, 3A) 8 LIF Detect, determines if a device is attached to the LIF 9 USB Device Data Minu
Draft #6 A-4 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 APPENDIX B WORKABOUT PRO4 SPECIFICATIONS BWorkabout Pro4 Specifications The Workabout Pro4 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Regulatory Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 High Capacity Lithium-ion Battery – 4400 mAh . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Workabout Pro4 Specifications B-3 The Workabout Pro4 Hand-Held Computer NOTE Performance specifications are nominal and subject to change without notice. Hardware Dimensions and Weight 7528 Long • 223 mm x 75/100 mm x 31/42 mm (8.78 x 2.95/3.94 x 1.22 x 1.65 inches) • 526g (18.6 oz) Processor and Memory • Texas Instruments® OMAP3®Processor 1 GHz • RAM: 512 MB • Flash ROM: 4 GB Operating System • Microsoft Windows® Embedded Hand-Held 6.
Draft #6 B-4 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 Workabout Pro4 Specifications B-5 Battery Specifications High Capacity Lithium-ion Battery – 4400 mAh Electrical Specifications NOTE The electrical specifications apply for ambient temperature TAMB of 0° to +40°C unless otherwise stated. Item Description Specifications Remark 1 Interface Chipset Maxim DS2762 - 2 Rated Voltage 3.7V Typical 3 Rated Capacity 4400mAh Typical 4 Rated Charge Current 1.2A Maximum 5 Charge Voltage 4.2 +/- 0.
Draft #6 B-6 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Safety Data Description Short Circuit Test Over Charging Test Reverse Charging Test Condition Test Condition/Result After a standard charge, short terminals and discharge for 1 hr. Protection circuit board to operate. After a standard charge, charge continuously at 4.2V and 4A for 8 hrs. Protection circuit board to operate. After a standard discharge, reverse-charge continuously at 4.2V and 4A for 8hrs.
Draft #6 Workabout Pro4 Specifications Description Vibration resistance Test References BS2011 Part 2.1 FDC (IEC68-2-37) B-7 Test Condition/Result After standard charge, tested under the following conditions: Random vibration 5Hz-500Hz ASD 0.02g2/Hz in 3 axis for 15 mins. After which, carry out a standard discharge, charge, discharge. No parting joints/cracks or damage to connectors. No leakage or critical damage.
Draft #6
Draft #6 APPENDIX C WIRELESS ZERO CONFIG SETTINGS CWireless Zero Config Settings Wireless Zero Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3 Configuring the Unit Using Wireless Zero Config . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Wireless Zero Config Settings C-3 Wireless Zero Config This appendix describes how to set up your radio using Windows Wireless Zero Configuration – an alternative to the Fusion Wireless Companion. NOTE For details about using Fusion Wireless Companion, refer to “Fusion Wireless Companion - Setting Up the XWing2 802.11a/b/g/n Radio” on page 4-31. • In the Today screen, tap on the Fusion softkey at the bottom of the screen. • In the Fusion Launch screen, tap on Options.
Draft #6 C-4 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Configuring the Unit Using Wireless Zero Config • In the Wi-Fi screen, tap on Add New.... • Type the appropriate SSID (Service Set Identifier) in the Network name: dialog box. The Network name field can contain a maximum of 32 characters. • Choose the type of connection in the drop-down menu next to Connects to. • Tap on Next.
Draft #6 Wireless Zero Config Settings C-5 • Key Index: This field becomes available if you deselect The key is automatically provided. This field is used to identify the WEP key. • Tap on Next to display the screen in which you can choose the EAP (Extensible Authentication Protocol) type. When Use IEEE 802.1x network access control is enabled, EAP types are available in the drop-down menu. The items will vary depending on your network setup.
Draft #6 C-6 Workabout Pro4 (Windows Embedded Hand-Held 6.
Draft #6 INDEX Index Numerics 36-key keyboard alpha keys, accessing . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 uppercase letters, creating . . . . . . . . . . . . . . . . . . . . . 2-9 A A.R.C WiFiConnect (private network) . . . . . . . . . . . . . . 3-37 About, Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 About icon (software version) . . . . . . . . . . . . . . . . . . . . . 4-45 accessories desktop docking station . . . . . . . . . . . . . . . . . . . .
Draft #6 Index - II Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Boot to BooSt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 built-in microphone, adjusting volume . . . . . . . . . . . . . . 4-55 C calendar attendees, assigning . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 categories, using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 creating & editing entries . . . . . . . . . . . . . . . . . . . . . 2-20 deleting appointments . . .
Draft #6 Index - III headset, adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . 4-55 headsets, pairing (Bluetooth) . . . . . . . . . . . . . . . . . . . . . . . 4-16 Home appearance, changing . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Home icon (Start screen) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Home Screen (desktop screen) . . . . . . . . . . . . . . . . . . . . 2-15 customizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6 Index - IV Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual N name, assigning to WORKABOUT PRO3 . . . . . . . . . . 4-45 navigation bar hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 shift-state indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 network, selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 Note recording a message (audio) . . . . . . . . . . . . . . . . . . 3-23 renaming . . . . . . . . .
Draft #6 Index - V Set for AutoRestore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Personal Tab OneShot tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39 Up_Down tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Task Manager, working with . . . . . . . . . . . . . . . . . . . 2-26 Settings tab (error level & log folder) . . . . . . . . . . . . . . .
Draft #6 Index - VI Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual Voice phone communication . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 VPN connection, setting up . . . . . . . . . . . . . . . . . . . . . . . 4-27 W warm reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 WiFiConnect A.R.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37 Windows 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draft #6
Draft #6 Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Solutions, Inc. All Rights Reserved.
