User's Manual

© 2014 Motorola Solutions, Inc. All Rights Reserved.
February 12, 2014
80073681.A
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..
• Remove existing End cap at the top of the WORKABOUT PRO 4.
• Connect the USB cable to USB connector.
• Assemble and Screw the new RFID Endcap
• Before Replacing battery, Stick the right CE/FCC/IC Label in the location following:
IF the model number of WorkAboutPro4 is 7528XHF or LF put this label:
IF the model number of WorkAboutPro4 is 7528XPHF or LF put this label:
MODEL: 7528XHF
CONTAINS APPROVED RADIO MODULE
MODEL: 21-148603-0B
CONTAINS FCC ID: UZ7211486030B & UZ77528HFA
CONTAINS IC: 109AN
-
211486030B & 109AN
-
7528HFA