User's Manual

40 Zebra P630i & P640i Card Printer User’s Manual 980541-003 Rev. B

Printer Driver Installation

Installing the Ethernet Printer Driver

Step 1. If not already done, connect power to the printer (see Page 30), and connect the

Ethernet Port on the rear of the printer to an Ethernet Network Port (see Page 31).

Step 2. Turn the Printer on, and let it initialize until the READY LED on the front panel

is lit.

Step 3. Insert the User Documentation, Drivers, and Training CD into the CD drive of the

host computer. The Select Language window will open.

Step 4. From the Select Language window, choose the appropriate language for

your system.

Note • To install the USB driver, see Page 34.

Important • The Ethernet Network must be configured correctly, with the Printer and the

host computer on the same subnet mask. If you are not sure how to verify this or change the

configuration, consult someone knowledgeable on Ethernet Networks.

Important • A valid static IP address must be assigned to the printer.

Important • See Section 7 for system-related troubleshooting issues.