User's Manual

Settings and Adjustments
Adjustments
980541-003 Rev. B Zebra P630i & P640i Card Printer User’s Manual 69
Adjustments
Color Calibration
To access the Color Calibration screen, select Start > Printers and Faxes. Right click on the
Zebra P630i or Zebra P640i printer listing. Select Properties > Device Settings >
Color Calibration.
Color rendering in the printer can be described in terms of a curve, which determines how
much power is put into the printhead for a given shade.
The Y, M and C color curves can be separately modified by the Gain and Offset parameters.
Click Restore Defaults if you are not satisfied with adjustments made.
The following procedures can be performed from the Color Calibration screen:
Note • The values shown above are the default values; recommended settings (different from
the default values) are shown on the next page.