User's Manual

58 Zebra P630i & P640i Card Printer User’s Manual 980541-003 Rev. B
Settings and Adjustments
Printer Properties
Printer Adjustment
To access the Printer Adjustment screen, select Start > Printers and Faxes. Right click on the
Zebra P630i or Zebra P640i printer listing. Select Properties > Device Settings >
Printer Adjustment
The following procedures can be performed via the Printer Adjustment screen:
• Print Station Adjust ... : Provides controls for print station adjustment.
• Laminate Station Adjust ... : Provides controls for accurate positioning of the laminate.
• Flip Station Adjust ... : Provides controls for flip station adjustment.
• Advanced Adjust ... : Provides controls for magnetic encoding and smart card
position adjustments.
• Card Hopper (Pick Position Adjust (Pixels): Adjusts the position of the truck when
picking a card from the hopper.
• Cleaning Station (Clean Frequency): Runs clean cycle will be run after the specified
number of cards have been printed. The clean frequency range is from 1 to 20, the
default = 10.