User's Manual

Printer Driver Installation
Installing the Ethernet Printer Driver
980541-003 Rev. B Zebra P630i & P640i Card Printer User’s Manual 45
Step 14. This brings up the Configure Ethernet Port window. Click the Browse button.
Step 15. Any Zebra printers will be located. Select (highlight) the desired printer (for this
procedure it is a P640i, but the steps would be the same for a P630i) and click the
OK button.
Note • If the Printer is not found, check to make sure the Printer is powered on; and the
Ethernet connector is engaged.
Note • Also, the Ethernet Network must be configured correctly, with the Printer and the host
computer on the same subnet mask. If you are not sure how to verify this or change the
configuration, consult someone knowledgeable on Ethernet Networks.