User Guide

Safety Information
Please read all of these instructions before
using your Variable Speed Zebra.They have
information to protect you, your customers,
and their property from harm or damage. Un-
derstanding the proper use of this tool will also
help you to make more accurate diagnostics
on the equipment that you are servicing.
Maximum Input Voltage.....................29 Volts
Maximum Current Through Unit.........1 Amp
•
NEVER connect any lead to (nor allow
any unconnected lead to touch) Line Volt-
age, or any voltage higher than 29 Volts.
• Do not alter the connection plugs. Use only
cables supplied by Zebra Instruments. If the
24V Power Supply Cable is used, use only the
recommended size fuse and never connect
to a voltage source higher than 24 VAC.
• Never allow your
Variable Speed Zebra to
get wet. If it does; dry thoroughly before using.
3