Specifications

Controlling Scanner from the POS System

Z-6070 can be controlled from the POS system via the

RS-232C interface. Controlling can be accomplished by

transmitting the following single byte commands to the

scanner. The default setting of the commands are as

follows:

ASCII Code Function Byte is Also Called:

OE Hex enable (resumes

disable)

Shift Out or <Ctrl-N>

OF Hex disable Shift In or <Ctrl-O>

05 Hex power-up

re-initialization

ENQ or <Ctrl-E>

12 Hex sleep DC2 <Ctrl-R>

14 Hex wake up (resumes

sleep)

DC4 <Ctrl-T>

When the scanner is disabled, the motor of the scanner will

stay on until the scanner goes into sleep mode.