Specifications

Changing Beeper Volume Using Push Button
The scanner can be programmed to change beeper tone,
volume and duration, the beeper volume can also be
changed by using push button.
The volume has 3 different selections, low, medium, loud,
which is operated follow the following steps.
1. Always keep the scanner in the stand
2. Press and hold down any one of the side buttons (left or
right) for about 5 seconds, the scanner will enter
(medium—low---loud) beeper cycle, every level of
setting beeps twice, user could release the button when
they hear the right beeps. The scanner beeps
accordingly.
Note:
The volume setting is not saved in non-volatile memory. That
means, the change will lost by powered-down and reset to
the configured setting.
If you wish to keep the changed the volume setting, use the
programming guide to set the changes.
23