User`s manual

USER’S MANUAL
Advanced Handheld High-Speed Laser Scanner
17
Start Of Configuration
2. Interface Setting
Barcode
Value
Barcode Label Description
KE97
Return to USB default
KE99
Return to RS-232 default
KE87
Enable USB virtual COM
(Virtual COM driver required. For installation steps refer to
Appendix 1.)
KE01 Enable IBM PC/AT/PS/2 Keyboard emulation
KE05
Enable stand-alone keyboard
(Required no keyboard or key simulator. Only available for special
firmware version.)
KE98 Enable wand emulation
(Only available for special firmware version.)
KE77 Enable OPOS/JPOS
(Available for USB interface only and requires driver. For RS-232
interface, the scanner needs reset and identifier code has to be
enabled.)
End Of Configuration