User's Manual
Table Of Contents
- Important Notice
- Introduction
- Programming Guide
- Connecting to a Host
- System Function Settings
- Scan Mode
- Radio Communication Setting
- Operation Function Setting
- Interface Settings
- The Symbologies
- Codabar Parameter Setting
- Code 39 Parameter Setting
- Code 93 Parameter Setting
- Code 128 Parameter Setting
- Chinese Post Code Parameter Setting
- MSI/Plessy Parameter Setting
- Code 11 Interface Setting
- ITF 2 of 5 Parameter Setting
- Standard 2 of 5 Parameter Setting
- Industrial 2 of 5 Parameter Setting
- UPC/EAN/JAN Parameter Setting
- Telepen Parameter Setting
- Matrix 2 of 5 Parameter Setting
- Data Editing
- Appendix 1: USB Virtual COM Driver Installation
- Appendix 2: Barcode Length Setting
USER’S MANUAL
Handy Wireless Scanner
3
Battery Installation
Installing Batteries
Please follow the steps below to install the batteries.
Alw
ays use the rechargeable batteries provided by the manufacturer to
avoid any non-compatible danger or void the warranty.
1. Move the lock for the battery compartment to the unlock position and remove the
back cover.
2. Align the met
al contact on the battery with the metal contact inside the battery
compartment and insert the battery.
3. Place the
back cover back on the scanner and move the lock to the lock position.