User's Manual

Note:

In cradle host mode, the scanner is always in master mode and cradle

is in slave mode. Therefore, you have to scan on “Unlock Pairing

Mode” barcode symbol to unlock paired scanner and cradle, than

connect or link to other devices.

6. As the scanner links to the communication cradle, the cradle LED

stays in BLUE. If in any case the scanner link timeout or enters

power down mode, then the cradle LED flashes in BLUE. Press

scanner trigger or place the scanner back into the cradle, the

communication links automatically again.

Note:

The default radio communication type of scanner sets in cradle host, if by

any chance the scanner lost this setting, use the programming barcode

symbologies provided in this booklet to set it as “Cradle Host” again.