User's Manual
WirelessHandheldGunTypeScanner
21
USER’SMANUAL
StartOfConfiguration
CradleHostMode
The scanner communicates with the host through the cradle. Typically, scanner and
cradleinthesamedeliveryboxarepairedandcorrespondedtohostinterfaceinfactory.
To check if the scanner is paired to the cradle, check the scanner LED group1 for slow
blueflashandcheckthetopcradleLEDforsteadybluelight.IfLEDgroup1ofscannerand
top LED of cradle are both flashing blue, follow the steps below to radio connect the
scannerandcradle.
CradleHostPairing
1. See
ConnectingtheCradletoconnectthecradleandthecomputer.Please
makesurethecradleLEDisflashingblueindicatingit’snotlinkedtoany
scanner.IftheLEDshowssteadyblue,thecradleisalreadypairedtoanother
scannersoyoumustunpairthescannerbeforecontinuing.
2. Poweronthescannerandenablecradlehostmodeifnecessary.
CradleHostmodeenable
Enablecradlemodewiththisset.
3. Usethescannertoscanthepairingbarcodeatthebottomofthecradleto
beginpairing.3shortbeepswillbeheard.
4. TheLEDindicatoronthescannerwillflashbluerapidlyindicatingsearch
modeinprocess.TheLEDonthecradlebecomessteadybluewhenthe
pairingissuccessful.
5. Scanthecorrespondinghostinterfacethecradleisusingtobeginusingthe
scanner.
ReturntoUSBdefault
ReturntocradleUSBcommunication.
(Communicationcradlelinkrequired)
Returntowand
emulationdefault
Returntocradlewandemulation.
(Communicationcradlelinkrequired)
ReturntoRS232default
ReturntoRS232cradlecommunication.
(Communicationcradlelinkrequired)
IBMPC/AT/PS/2Keyboard
emulation
CradleIBMPC/AT/PS/2Keyboardemulation.
(Communicationcradlelinkrequired)
EndOfConfiguration