Owner`s manual

12
Initial Adjustments for Proper Fit
The Rapid Diver™ System allows the diver a universal fit feature. For
proper performance, please be sure that your system fits as described
below. For initial adjustments, loosen the waist and back strap and then
put the BC on (before attaching it to a SCUBA cylinder) and adjust the
shoulders and waist as follows.
1. Loosen all of the straps and
make sure all clips are secured
before donning. Make sure you
have at least a few inches of
strap loose to ensure an easy
adjustment. Place your elbows
through the arm-straps as shown
Fitting and Assembly
2. Raise the Rapid Diver over
your head. Put your head
through the opening in the Rapid
Diver™ and lower the system
onto your shoulders.
Fig. 7
Fig. 8