Owner`s manual
27
Use of non-factory parts or accessories, or any change to the product
not specically authorized by Zeagle Systems, Inc., or performed by an
unauthorized repair facility, may cause improper operation, damage, or
leakage of the BC resulting in a loss of buoyancy control or air holding
capability. This could result in injury or death, plus will void your
warranty. Replace worn or damaged items with approved, factory
supplied or specied parts ONLY.
Inspection and Service Interval
Your BCD (including the Inator) should be inspected and maintained by an
Authorized Zeagle Dealer at least once a year, and more often if you dive
frequently. This is a required action to keep your warranty in effect. There is a
Service Record in the back of this manual for the Dealer to record the service
performed.
Installation of New Parts/ Alterations
- Check that the Bx connection is snug (or hand tight)
before EACH DIVE!
- Periodically check ALL threaded connections such as
. OPV Flanges and Shoulder Dump Cap for tightness.